Garmin VIRB X/XE Aviation Headset Audio Cable, In-Line Pass-Through, Stereo

Overview

The Garmin 010-12256-21 is a headset audio cable for VIRB X and VIRB XE that lets your camera record cockpit headset audio in stereo while you keep using the headset normally. It plugs in-line between the audio out jack and the headset, then feeds the same audio to the camera so intercom, radio traffic, and spoken narration end up on the video. The cable is 5 ft 9 in (1.75 m) long, which gives you enough reach to mount the VIRB where it has a clear view and still route the lead along existing wiring runs.

This cable can carry stereo music or auxiliary audio sources when they are present on the same output, and it preserves 3D Audio when used with compatible radios and audio panels. For boat use, it can be a clean way to capture headset-based comms at an enclosed helm or cockpit, as long as your system provides an audio out jack that matches your headset connection.

Key features

• Compatible with VIRB X and VIRB XE action cameras
• 5 ft 9 in (1.75 m) length for flexible camera placement and cleaner routing
• In-line connection between the audio out jack and headset keeps the headset plugged in while audio is recorded
• Stereo recording for headset audio, with support for 3D Audio when available from compatible radios and audio panels
• Passes through stereo music and auxiliary audio sources carried on the same output

Installation and setup

Route the cable so it will not interfere with controls, seat travel, or a moving helm. Connect it in-line between the audio out jack and your headset, then connect the camera end to your VIRB before you start recording.

After the first connection, do a short test clip with normal headset volume so you can confirm levels before a long run. Secure the cable with gentle strain relief at each connector and keep the plugs away from standing water, spray, and high-chafe areas.

Compatibility and fit

This accessory is intended for VIRB X and VIRB XE and is meant to sit between a headset and an audio out jack. Before ordering, confirm you have the correct jack type and enough clearance at the panel for an in-line connection without putting side load on the sockets.

If you are integrating it into an onboard comms setup, verify that the audio out you plan to tap is suitable for a headset-style connection and that recording that feed is permitted for your use case.

Use cases on board

A good match for skippers and crews who run a VIRB at the helm and want the same comms and narration they hear in their headset captured on the video. It also suits training and review where recorded radio and intercom audio matters as much as the footage.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.