Jabsco Quiet Flush E2 Raw Water Marine Toilet, Regular Bowl, 24V, Soft-Close Lid

Overview

The Jabsco 38245-4194RSP is a 24V Quiet Flush E2 raw-water marine toilet with a regular bowl, a composite soft-close seat and lid, and touch-panel flush control. It runs on a 24V DC system with a 19.2 to 28.8 VDC operating range, and the control panel gives you Eco, Normal, and Empty flush modes, with Eco mode using 1.0 litre per cycle.

This version uses a diaphragm rinse pump for sea, river, and lake water, so it suits boats that are set up for raw-water flushing rather than flushing from the onboard potable system. The bowl inlet takes a 19 mm hose barb and the waste discharge is 25 mm, with straight or 90 degree discharge options and a 38 mm adaptor option where the plumbing layout calls for it.

Key features

• 24V DC toilet system with a 19.2 to 28.8 VDC operating range
• Raw-water rinse pump for sea, river, and lake water, self-priming to 1.8 m
• Regular bowl with a composite soft-close seat and lid
• Touch sensor panel with Eco, Normal, and Empty cycles
• Eco flush uses 1.0 litre of water per cycle
• Base mounts in 90 degree increments and the discharge pump rotates 180 degrees for left, right, or rear hose routing
• 19 mm bowl inlet and 25 mm waste discharge hose barb, with straight or 90 degree discharge port options
• Panel and control box are IP56 rated

Installation and setup

The installation layout is one of the stronger points here. The base can be positioned to suit tighter head compartments, and the discharge pump can be rotated so the pipework can be routed more cleanly toward the rear of the toilet. That makes a difference on boats where tank location, bulkheads, or stringers leave very little room to work with.

This toilet can be installed above or below the waterline on powerboats and sailboats. The raw-water rinse pump uses 19 mm inlet and outlet connections and includes an inline strainer, which is useful when the intake run is exposed to the kind of debris that turns up in sea or river water.

Servicing and day-to-day use

The Quiet Flush E2 platform is built around easier access when service is needed. The discharge pump assembly uses a quick-release arrangement, so getting to the macerator side of the system is less awkward than on older installations that force you to strip down more of the toilet just to reach the pump.

In daily use, the touch panel keeps operation simple and tidy in a wet head compartment. The 3 m link cable gives you some freedom on panel placement, which helps when the toilet itself needs to sit hard against a bulkhead or under a counter edge.

Compatibility and fit

This model makes sense for boats with a 24V house system that want an electric toilet with a full-size regular bowl and raw-water flushing. It also suits refits where plumbing access is limited and the discharge direction needs to be adjusted to match the existing hose run rather than rebuilding the compartment around the toilet.

The bowl is glazed vitreous china, the regular seat and lid are thermoset urea, and the base assembly is ABS. That combination works well in normal marine head use where washdowns, humidity, and constant movement are part of the environment.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.