Lumitec TouchDome LED Dome Light, Touch Control, Two-Color, Dimmable, 10-30V, IP67, Stainless Steel

Overview

The Lumitec TouchDome is a touch-controlled, surface-mount LED dome light with a stainless steel bezel that has a polished finish and two-color dimming output. It runs on 10-30 VDC, draws about 6W, and puts out up to 244 lumens in white light. The fixture is IP67-rated and measures 6.75 in in diameter by 1.13 in deep.

Two marked contact points on the lens handle on/off, dimming, and color change, so you can operate it with wet hands or gloves. It fits well in cabins, heads, and cockpits, and it also works in utility spaces where you want a sealed light and a second color option for nighttime use.

Key features

• Surface-mount footprint: 6.75 in diameter x 1.13 in depth
• 10-30 VDC input for common 12V and 24V boat systems
• Up to 244 lumens in white light; white CCT 5000K; CRI 70+
• About 6W draw (410 mA at 12V DC; 215 mA at 24V DC) for typical cabin-light circuits
• Two touch contact points for on/off, dimming, and color change, including operation when wet or while wearing gloves
• IP67 sealed construction for damp lockers, heads, and washdown-prone areas
• USCG ignition protected
• Mounting pattern uses three #6 screws and a 3/4 in wire exit hole through the mounting surface
• Second contact point can be wired to switch an external lighting circuit; the external circuit is protected by a built-in breaker that trips above 2.5A

Variants

TouchDome is offered in two light-color configurations. Each version dims and switches between white and a second color using the touch contact points on the lens.

The housing, mounting footprint, and electrical range remain the same across the range. The difference between variants is the secondary color channel.

• 101097: Light Color White/Blue. Blue light is often used for low-glare cockpit or deck lighting after dark.
• 101098: Light Color White/Red. Red light is commonly used to reduce night-vision disruption when moving around at night.

What’s included

• TouchDome light fixture
• Three #6 self-tapping mounting screws
• Drill template printed on the instruction sheet

Installation and setup

This is a surface-mount light. Plan for a 6.75 in diameter footprint, then use the drill template to mark three mounting holes and a 3/4 in wire exit hole. Mount with three #6 self-tapping screws and tighten them snugly without over-tightening.

After installation, keep both contact points accessible, since that is where on/off, color change, and dimming are controlled.

Electrical and system integration

TouchDome runs on 10-30 VDC and draws about 410 mA at 12V DC or 215 mA at 24V DC (about 6W) in white mode. It can be installed on a typical switched cabin-light circuit while keeping the touch controls available at the fixture.

When the second contact point is wired to control an external lighting circuit, it acts as an on/off control and the external circuit is protected by an internal breaker that trips above 2.5A. Cycling power to the TouchDome resets the breaker.

Use on board

This light is a good match for boats that want an overhead dome light you can dim at the fixture and switch to red or blue for nighttime movement. The IP67 seal also makes it practical for damp spaces like heads, lockers, and hardtop undersides where spray or condensation is part of normal use.

Maintenance and care

Clean the lens and bezel with mild soap and water. Avoid abrasive pads and harsh cleaners that can haze the lens or scratch the polished finish.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.