Simrad Cantilever Tiller Bracket, For TP Series Tiller Pilots, 135-240 mm

Overview

The Simrad CB-1 is a cantilever tiller bracket that gives you a solid mounting point for Simrad TP Series tiller pilots on a vertical surface in the cockpit. The bracket adjusts from 135 to 240 mm (5.31 to 9.44 in) so you can set the pilot at the right reach and keep clearances where you need them.

It is used when the tiller pilot needs a fixed “shore side” attachment on a coaming or bulkhead instead of a flat mounting pad. The mounting pattern includes five holes so the horizontal spacing can be shifted to line up the pilot cleanly with the tiller connection.

This is a mechanical autopilot mounting accessory, not a chartplotter or display bracket.

Key features

• Adjustable reach from 135 to 240 mm (5.31 to 9.44 in) for dialing in cockpit geometry
• Fits Simrad TP Series tiller pilots for vertical-surface installations
• Five mounting holes let you shift horizontal spacing to match the pilot’s alignment
• Provides a fixed terminating point for the outboard end of a tiller pilot
• Helps keep the pilot positioned consistently when mounted on a cockpit coaming or bulkhead

Compatibility and fit

This bracket is intended for Simrad TP Series tiller pilot setups where the pilot mounts to a vertical face. Before ordering, measure the distance from the proposed mounting surface to the tiller attachment point and confirm the pilot will operate through the full steering range without binding.

Installation and setup

Mount the bracket to a flat, rigid vertical surface such as a cockpit coaming or bulkhead, then set the bracket length so the tiller pilot sits square to the tiller and has room to extend and retract. Use appropriate marine fasteners and backing support for thin fiberglass panels, seal any drilled holes, and check for interference with lockers, seat lids, and sheet leads through the full swing of the tiller.

Use on board

This style of bracket is a good match for tiller-steered sailboats that use a TP Series tiller pilot and need a clean, repeatable mounting position in the cockpit. It is commonly used for short-handed sailing where the pilot stays installed and ready, while still keeping the cockpit layout workable.

Maintenance and care

Rinse the bracket after saltwater use and periodically re-check fasteners for tightness. If the bracket is installed in a high-splash area, a quick freshwater rinse helps prevent salt buildup around the mounting points.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.