Garmin P79 In-Hull Depth Transducer, NMEA 2000, 235 kHz, 500 ft Depth, 0-22° Deadrise

Overview

The Garmin 010-11394-00 is an in-hull smart transducer that puts depth data onto a NMEA 2000 network for display on compatible instruments. It is a 100 W transducer rated to 500 ft, with a 235 kHz operating frequency and a 6 degree beamwidth, and it supports mounting on hull deadrise angles from 0 to 22 degrees.

Since it mounts inside the hull, there is nothing hanging below the boat and the sensing face stays protected from impact and bottom growth. The key to good readings is picking the right spot in the hull and installing it so the transducer stays level and coupled tightly to the fiberglass.

Key features

• In-hull mount for depth data on a NMEA 2000 network
• 100 W output, rated to 500 ft maximum depth
• 235 kHz operating frequency with a 6 degree beamwidth
• Adjustable mounting supports 0 to 22 degrees of hull deadrise
• Not recommended for cored hulls; maximum fiberglass thickness should be no more than 5/8 inch
• Inside-hull installation keeps the exterior hull smooth with no bottom protrusion

Compatibility and fit

This transducer reads through solid fiberglass. It should be mounted where the laminate is solid and free of core material, flotation, voids, or trapped air and where the fiberglass thickness is no more than 5/8 inch. Confirm the deadrise at the intended location does not exceed 22 degrees.

Choose a spot where the transducer beam will not be blocked by the keel or running gear and where the hull stays in contact with the water while underway. For planing hulls, placement that stays clear of strakes and turbulent water helps keep the depth number steady at speed.

Installation and setup

As with most shoot-through transducers, performance depends heavily on the mounting location. A practical approach is to test a few candidate spots inside the hull and compare readings before bonding the base in place.

Installation uses a bonded base that is filled with propylene glycol as the coupling liquid, then the transducer is locked into the base and adjusted to match deadrise so the beam stays close to vertical. Route cabling so connectors sit above the bilge waterline and keep the transducer cable separated from other wiring where possible to reduce noise.

Network integration

Depth data is carried on the NMEA 2000 backbone, which means it can be shared with compatible displays and instruments already on the network. Plan for an open drop point on the backbone and a correctly powered and terminated NMEA 2000 network so the sensor and the rest of the system stay stable.

Use cases on board

This setup makes sense for boats that want depth on the network without drilling the hull for a thru-hull transducer. It is also a good fit when trailering, beaching, or running in areas where external hardware under the hull is likely to get bumped.

Maintenance and care

Periodically check the installation area for leaks, confirm the housing remains properly filled with coupling liquid, and keep connections dry and supported so the cable is not taking strain. Avoid solvent-based cleaners around the transducer body and face since they can damage plastics.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.