Hella Marine 8542 Flush-Mount Deck Floodlight, 12V, 2x55W, IP54

Overview

The Hella Marine 998542001 is a recessed twin-bulb halogen floodlight that throws a wide flood beam for working light on deck, in the cockpit, or under spreaders.

It runs on 12V DC and uses two 55W H3 bulbs (110W total), drawing about 9.2A at full output. The front face is about 187 x 107 mm (7.36 x 4.21 in) with a 32 mm (1.26 in) profile, and the lamp body swivels through about 115 degrees so you can aim the beam after installation.

The housing is white, fiber-reinforced plastic with a glass diffuser protected by a raised rim, and it carries an IP54 rating for dust and splashing water.

Key features

• Recessed (flush) mount format that keeps snag points down on hardtops, masts, and deck structures
• Twin FF double-reflector optics with a glass diffuser for a wide work-light pattern
• 12V load: 2 x 55W H3 halogen (110W total), about 9.2A draw
• Swivels up to 115 degrees after mounting to put light where you actually need it
• IP54 protection for exposed mounting where spray and washdown splash are expected
• Pre-wired 250 mm connection lead for straightforward wiring inside the mounting space
• 316 stainless holder and fasteners for better corrosion resistance around salt spray

What's included

• Deck floodlight assembly with pre-wired 250 mm connection lead
• 2 x 12V / 55W H3 halogen bulbs

Compatibility and fit

This light is for 12V DC systems. Plan the circuit for roughly a 9 amp load, and size the wire and fuse to match the run length and your boat's electrical standards.

Because it is recessed, check the available cavity behind the mounting surface and confirm you have room to route the short lead to a dry junction point. The light outlet is 145 x 83 mm, so placement and aiming matter if you want to keep glare out of the helm.

Installation and setup

Mount it on a flat section of structure that stays solid under vibration. Seal the cutout and fasteners to protect cored panels, and keep splices in a sheltered area using tinned wire and heat-shrink connectors.

Once powered, aim the lamp through its swivel range, then re-check clearances. Halogen lamps run hot, so keep the back of the unit away from wiring bundles and anything that can soften with heat.

Use on board

This is a good match for boats that want a warm halogen work light for handling lines, loading gear, or lighting a cockpit while fishing at night. It also fits spreader and hardtop installs when a broad wash of light is more useful than a tight spot.

Maintenance and care

Rinse salt off the lens, keep the glass clean for best output, and replace bulbs as a matched pair when output starts to drop. Let the lamp cool before touching the glass or rinsing with cold water.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.