Vimar LINEA Classica 2-Module Self-Bearing Cover Plate, For 3-Module Flush Boxes, Thermoplastic Resin, Ivory, 120 x 76 mm, IP00

Overview

The Vimar VM10736 is a 2-module self-bearing cover plate for 3-module flush mounting boxes in the LINEA Classica range, finished in a matte ivory-white tone close to RAL 9003. The front measures 120 x 76 mm and it sits flush when paired with the correct box and Vimar mechanisms.

This plate is rated IP00, so it does not add water sealing. On board, it belongs in dry, protected locations such as cabin panels, nav stations, sheltered helm consoles, and interior bulkheads where you want a clean finish around your switching and outlets.

Key features

• Made from halogen-free thermoplastic resin with a matt, untreated surface finish.
• Fits 3-module flush mounting boxes while using a 2-module layout in horizontal orientation (1 module in vertical orientation).
• Mounts either horizontally or vertically to match panel layout and labeling preference.
• Face size 120 x 76 mm, with matching built-in dimensions for a tidy edge-to-edge fit.
• Includes a label space to keep circuits and functions clearly identified.
• IP00 protection level, so the cover plate is intended for dry interiors rather than exposed spray zones.
• Suitable for built-in installations, wall duct setups, and subfloor installation duct boxes where these systems are used.

Compatibility and fit

This is a finishing plate for Vimar LINEA Classica installations that use 3-module flush mounting boxes and compatible inserts. It is commonly used where the box footprint is 3 modules, but the visible plate is set up for a 2-module arrangement when mounted horizontally. Confirm your box format and the module layout of your devices before ordering, especially on refits where older frames and module standards can be mixed.

Installation and setup

The plate installs over the mounted devices and aligns to the box and frame, then is secured in place and finished with the supplied screw covers for a clean face. Take a moment to square the box and keep device modules level before tightening so the plate sits flat and the gaps stay even around the edges.

Use on board

This plate is a good match for owners and builders who are keeping a consistent Vimar LINEA Classica look across cabin and console areas, or who are replacing a worn plate without changing the underlying box. Because it is not a sealed cover, it works best behind closed console doors, inside cabins, or anywhere the panel stays out of direct washdowns.

Maintenance and care

Wipe the surface with a soft cloth and mild soap if needed. Avoid abrasive cleaners that can burnish a matte finish, and keep salt residue from building up around edges and fasteners in coastal use.

What’s included

• Self-bearing cover plate
• Mounting screws
• Screw covering strips (10797.01)

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.