TACO Marine Rigid Vinyl Rub Rail, 2-3/16 x 7/8 in, 20 ft, SS Insert Sold Separately

Overview

The TACO Marine V21-9790 is a rigid vinyl rub rail profile for larger boats that need a clean hull-to-deck finish and dependable protection along the sheerline. This 2-1/4 in. x 7/8 in. profile is supplied in 20 ft lengths and is suited for 26 to 50 ft boats, including center consoles, sport-fishing boats, cruising boats, and larger pleasure craft.

The rail is drilled and countersunk for #10 screws on 8-inch centers, which helps keep the fastening layout consistent during installation. It accepts the TACO Marine S11-4650 stainless steel insert, sold separately, for a finished face that handles everyday dock contact, piling rubs, and normal boarding-area wear.

Key features

• Rigid vinyl rub rail profile sized 2-1/4 in. x 7/8 in. for larger boat refits and new installations.
• Suited for 26 to 50 ft boats where a substantial rail is needed along the hull-to-deck joint.
• Supplied in 20 ft lengths to support long, continuous runs around the boat.
• Drilled and countersunk for #10 screws on 8-inch centers for a consistent fastener pattern.
• Accepts TACO Marine S11-4650 stainless steel insert, sold separately.
• Cuts and drills with standard woodworking tools, making it workable during shop or yard installation.
• Requires heat when forming radiused sections, especially around tighter curves.
• Available in Black or Arctic White to suit common gelcoat and trim combinations.
• Made in the USA and backed by a 5-year limited warranty.

Variants

This rub rail is offered in two color configurations so the rail can better match the boat's hull, deck, or trim scheme.

The color changes between variants, while the V21-9790 profile, 20 ft length, S11-4650 insert requirement, and #10 screw layout remain the same across the listed options.

• V21-9790BKA20D: Black. This color works well when the rail is meant to create a defined trim line or match darker hull accents, windshield frames, or hardware details.
• V21-9790WHA20D: Arctic White. This color gives the rail a lighter appearance that blends more closely with many white gelcoat hulls and decks.

Installation and fit

For replacement work, compare the existing rub rail height, projection, insert style, and fastener pattern before ordering. Matching the profile matters because the rail has to cover the hull-to-deck joint properly and sit cleanly against the boat's existing contours.

Plan the installation with the stainless steel insert, fasteners, splice caps, end caps, and sealant required for the job. The S11-4650 insert is not part of the rail itself and should be ordered separately when the finished installation calls for the stainless face.

Use on board

This profile is a strong match for boat owners, yards, and builders working on larger fiberglass boats that see regular dockside contact, marina maneuvering, rafting, or fishing use. The rigid vinyl body gives the boat a finished edge, while the compatible stainless insert adds a practical wear surface for high-contact areas.