Perko Stealth Series LED Removable Bi-Color Pole Light, For 1049 2-Pin Base, 12V, USCG 2nm, 0° Rake

Overview

The Perko Stealth Series is an LED removable bi-color pole light for 12 volt navigation lighting on power-driven boats under 20 meters. It combines red and green lenses in a plug-in bow light format, with 2-mile USCG 2 nm certification for the required sidelights when installed in the correct location and orientation.

This pole light uses a stainless steel top, a 3/4 inch diameter anodized aluminum tube, and a Stow-A-Way plug-in pole that can be removed when the bow area needs to stay clear. It has a 0 degree pole rake, a locking collar, and is made to fit a Perko 1049 2-pin mounting base.

Key features

• LED bi-color navigation light with red and green lenses for bow sidelights on 12 volt systems.
• 2-mile USCG 2 nm certification for power-driven vessels under 20 meters when installed as required.
• Removable Stow-A-Way plug-in pole helps keep the foredeck clear when the light is not in use.
• Stainless steel top and 3/4 inch diameter anodized aluminum tube suit exposed deck locations.
• 0 degree pole rake and locking collar support a secure, upright installation on the correct base.
• Requires a Perko 1049 2-pin mounting base, which should be confirmed before replacing an existing pole light.

Variants

This removable bi-color pole light is offered in two pole lengths for different bow layouts and visibility needs.

The main difference between the variants is pole length. The 12 volt LED light, red and green lenses, 0 degree rake, locking collar, and fit with the Perko 1049 2-pin base remain consistent across these configurations.

• 1619DP2BLK: 12 inch pole length. This shorter pole suits installations where the bow light can sit lower while still maintaining the required sight line.
• 1619DP3BLK: 17-3/8 inch pole length. The taller pole gives additional height at the bow, which can help on boats with raised casting decks or other equipment near the mounting area.

Installation and fit

Confirm that the boat has, or will be fitted with, the compatible 1049 2-pin base before ordering this pole light. The pole plugs into the base and locks in place, so the base style and collar fit matter just as much as the electrical connection.

Because this is a bi-color bow navigation light, it should be installed where the red and green lenses face the proper directions and remain visible without being blocked by rails, trolling motors, cleats, anchors, canvas, or deck gear. The 0 degree rake is intended for a straight upright mounting position.

Use on board

This light is a practical match for small and mid-size powerboats that need a removable bow navigation light, especially fishing boats where the foredeck or casting deck needs to stay open during daytime use. The pole can be unplugged and stowed after the run, leaving the mounted base in place for the next trip.