Marine Engine Cooling

OverviewThe Jabsco 34739 Series is a flangemount 3 inch marine ventilation blower for moving air in engine rooms, fuel compartments, galleys, heads and other enclosed spaces on board. Each DC model is rated at 150 CFM open-air flow and uses a reinforced...

OverviewThe Jabsco Profile M is a flexible pump impeller for marine pumps that use an 8-blade, drive type 7 impeller with a 2-9/16 in diameter, 2 in depth, 5/8 in shaft, and brass insert. It is used as a service replacement in raw-water cooling, bilge,...

OverviewThe Jabsco 6303 Impeller Kit is a replacement flexible impeller kit for compatible Jabsco marine pumps where a 6-blade, single-flat-drive impeller is required.This impeller size is commonly listed as 2 in. diameter by 7/8 in. wide with a 5/16 in...

OverviewThe Jabsco 35440-Series is a Flexmount 4 inch DC ventilation blower for moving air through engine spaces, bilge areas, and other enclosed compartments on boats. It uses 4 inch ducting and is rated at 250 CFM (7.0 m3/min), giving a clear fit...

OverviewThe Jabsco 35400-Series is a 4 inch flangemount ventilation blower for moving air through engine room, fuel compartment, galley, head, and bilge ventilation ducting on boats. It delivers 250 CFM of open air flow, equal to about 7.0 m³/min, and is...

OverviewThe Jabsco 35770 Series is a continuous duty 4 in Flexmount blower for moving air through engine room and bilge ventilation ducting on boats. The series is rated at 250 CFM, equal to 7.0 m³/min, and is offered in 12 VDC and 24 VDC versions so it...

OverviewThe Jabsco 35760 Series is a DC flangemount continuous-duty 4 inch blower for boat ventilation systems that need steady air movement through engine spaces, bilges, and enclosed machinery areas. It moves 250 CFM, or 7.0 m³/min, and is offered in...

OverviewThe Jabsco 36770 Flexmount Continuous Duty 4" Blower is a 4 inch AC ventilation blower for equipment spaces and diesel engine room ventilation where continuous air movement is needed. It uses a Flexmount bracket so the outlet can be rotated to...

OverviewThe Jabsco 1673-Series is a flexible impeller kit for servicing compatible Jabsco self-priming pumps used in marine water transfer, engine cooling, bilge, and general pump applications. The impeller uses a 12-blade profile with spline drive, a...

OverviewThe Jabsco 18673 Replacement Impeller Kit is a Profile I flexible impeller kit for compatible marine pumps used in engine cooling, transfer, bilge, and general water-handling applications.This range uses a 10-blade impeller with a 2 in diameter,...