Overview

The Vimar Arké 19671 Round Cover Plate is a 1 module natural wood cover plate for ARKÉ wiring devices, with a 94.5 x 94.5 mm face size and an 8.5 mm depth. It gives a finished look to a single switch, socket, or control point while keeping the softer round profile used across the Arké range.

This plate can be mounted horizontally or vertically and is intended for built in installations with the matching 1 module ARKÉ support. On board, it makes the most sense in protected interior spaces such as cabins, saloons, enclosed helm stations, and other dry areas where the electrical trim is visible and the finish matters.

The plate itself is IP00, so it is not the piece to use in exposed weather locations or anywhere that sees washdowns and direct spray. For marine refits and new builds, it works best when you are matching an ARKÉ based interior system and want a wood finish that ties into joinery, cabinetry, or trim panels.

Key features

• 1 module Round cover plate for the Vimar ARKÉ series
• Natural wood construction with a matte untreated surface
• 94.5 x 94.5 mm overall size with 8.5 mm depth
• Horizontal or vertical mounting
• Suitable for built in installations
• Clamp fixing type and halogen free construction
• IP00 rated, which makes it an interior trim component for protected locations
• Offered in three wood finishes under the same Arké 19671 range

Variants

This product is offered in multiple natural wood finishes within the same Arké 1 module Round plate range.

Across the range, the plate format stays the same at 1 module, 94.5 x 94.5 mm, with the same 8.5 mm depth, horizontal or vertical mounting, and the same interior use profile. What changes between variants is the wood finish and visual tone.

• VM19671.52, Color Cherrywood. This finish has a warmer reddish brown look that suits interiors with richer timber accents and darker joinery.
• VM19671.53, Color Maple. This is the lightest finish in the group and works well where a paler wood tone keeps the electrical point less prominent on light panels.
• VM19671.51, Color Walnut. This finish carries a deeper brown tone that pairs well with traditional cabin furniture and darker interior trim.

Compatibility and fit

This cover plate is specific to the ARKÉ system and to a single module layout. That matters on boats, because decorative plates, device supports, and mechanisms are not universal across electrical series even when the visible opening looks similar. Matching the series and the 1 module support behind the plate is the key fit check before ordering.

The square 94.5 mm front size gives enough visual coverage for a clean finish around the installed device without taking up much panel space. That makes it useful where the switch or outlet position is visible in cabin furniture, bulkheads, or other finished interior panels.

Installation and onboard use

For marine interiors, this plate is a good match for owners, yard teams, and refit installers working on enclosed accommodation spaces rather than exterior weather decks. It suits projects where the electrical hardware needs to sit neatly within a wood finished interior and where the boat is already using Vimar ARKÉ components.

Because the surface is untreated natural wood and the protection rating is IP00, the plate belongs in dry, sheltered locations. In practical terms, that means cabin and saloon switch points, interior bulkheads, or enclosed helm areas, not open cockpits, transoms, or other positions exposed to spray, salt, or frequent cleaning water.