Cover Plates

OverviewThe Vimar Idea 16783 Rondò cover plate is a 1-module panel-mount cover plate in die-cast metal for the Vimar Idea switching range. It measures 41 x 85 x 9 mm, supports horizontal or vertical mounting, and uses clamp fastening for installation...

OverviewThe Vimar IDEA Classica cover plate is a 6 (3+3)-module cover plate for Vimar IDEA installations, offered here in Bright White, Idea White, and Graphite Grey. It is a technopolymer plate with a glossy finish, supports horizontal or vertical...

OverviewThe Vimar Eikon 20652 is a 2-central-module Classic cover plate range for Eikon wiring devices. It is the visible trim piece that finishes a two-module switch or control point while keeping the opening clean and aligned. Depending on the variant,...

OverviewThe Vimar Eikon EVO 21657 is a 7-module cover plate used to finish an Eikon EVO device group so the switches, outlets, or control modules sit behind a clean frame on your boat.It mounts horizontally or vertically (7 modules across in a horizontal...

OverviewThe Vimar Eikon EVO 21644 is a 6-module metal cover plate that finishes an Eikon EVO control point with a clean, flush front face. It is sized for a 2+2+2 module layout with 71 mm between centres, and the plate measures about 95.4 mm wide by 237...

OverviewThe Vimar Arké 19641 is a 1-module Classic cover plate used to finish a single Arké wiring device opening with a tidy 90 x 90 mm front face. It mounts with clamp fixing to the matching Arké support and has a depth of 8.6 mm, which helps when you...

OverviewThe Vimar Plana series is a 1-module cover plate used to finish a single Plana switch, socket, or data insert so the installation looks clean and complete on a bulkhead, liner, or panel.The plate face measures 80 x 80 mm with a depth of 9 mm, and...

OverviewThe Vimar Plana Series is an 8-module cover plate with a 2+2+2+2 layout and a 71 mm distance between centers.It gives a clean finish around a row of Vimar modular devices on a bulkhead or interior panel, so banks of switches, outlets, and...

Switch Cover/Switch PlateHeight: 5-1/16"Width: 3-5/8"

OverviewThe Vimar LINEA Series is a 2-module cover plate range for LINEA switching devices, with a 90 x 88 mm face, a slim profile of about 7.8 mm, and snap-on fastening over a matching frame.This plate is used to finish a 2-module switch or control...

OverviewThe Vimar LINEA Series is a 3-module cover plate range for interior switching points, with horizontal or vertical orientation, snap engagement, and an overall size of 122.8 x 88.0 x 10.3 mm. It is made for LINEA 3-module layouts, including 3...