Overview

The Garmin ECHOMAP UHD2 protective cover is a fitted cover that protects compatible chartplotter displays from sun and scratches when the unit is not in use.

It is offered in 6 inch, 7 inch, and 9 inch sizes so you can match the cover to the screen size on your ECHOMAP UHD2. Use it at the dock, on the trailer, or during storage to keep the display face from getting scuffed by gear, dock lines, or casual contact.

Key features

• Made for Garmin ECHOMAP UHD2 chartplotters in 6 inch, 7 inch, and 9 inch display sizes
• Helps block direct sunlight on the screen and bezel when the boat is parked
• Helps prevent scratches from canvas, tackle, and cockpit traffic while the unit is idle
• Snug cover that sits over the display face for quick on and off
• Useful for trailering and seasonal storage where the helm gets bumped and brushed often

Variants

This protective cover is available in multiple sizes that match the screen size of your ECHOMAP UHD2 display.

The fit is size-specific, so confirm your unit is a 6 inch, 7 inch, or 9 inch ECHOMAP UHD2 before ordering.

• 010-13116-04: Size 9". Often used on larger helm stations where the display sits in direct sun between runs.
• 010-13116-03: Size 7". Common on mid-size consoles that see frequent handling and trailering.
• 010-13116-02: Size 6". Common on compact helms where the display is close to rods, nets, and deck gear.

Compatibility and fit

This cover is shaped for the ECHOMAP UHD2 family. Covers for other Garmin plotter families use different front profiles, so cross-check your model series and display size before ordering.

Installation and day-to-day use

Slip the cover over the display face once the unit is powered down. Remove it before operating the chartplotter so the screen and controls are fully accessible.

If you wash down the helm, put the cover on after the area is dry so moisture is not trapped against the display.

Care and storage

Rinse salt residue from the cover with fresh water when needed and let it air-dry before long-term storage. Keeping the cover clean helps avoid rubbing grit across the display face.