Overview

The Garmin 010-12110-04 is a mount weather cover that caps the exposed connector pins on a zumo mount when the navigator is removed.

It helps keep salt spray, rain, dust, and grime off the contacts during storage, trailering, or dockside washdowns. This is especially useful on open helms, tenders, and console mounts where the cradle is left exposed when you bring the GPS below.

This is a cover for the mount connector area, not a protective case for the GPS itself.

Key features

• Covers the mount-side connector pins when a zumo unit is not docked
• Helps reduce corrosion and contact contamination from spray, road grime, dust, and general exposure
• Compatible with mounts for zumo 590LM and zumo 595LM
• Fits and removes by hand for quick stow-and-go use
• Black cover for a clean look on the mount when the GPS is off the boat

Compatibility and fit

This cover is meant for the connector block on the zumo mount used with zumo 590LM and zumo 595LM units. It is not a universal Garmin dust cap and it will not fit unrelated cradles or marine chartplotter mounts.

If your installation uses a different cradle style, match the mount model to the intended zumo series before ordering.

Installation and onboard use

Remove the navigator from the cradle, align the cover over the exposed pin area, and press it into place until it sits flush. Remove the cover before docking the GPS back onto the mount.

This makes sense for boaters who routinely remove the unit for security or storage and want the mount contacts protected between trips.

Maintenance and care

Rinse off salt and grime with fresh water and let the connector area dry before reinstalling the GPS. Avoid harsh solvents that can soften or discolor small protective parts.

What’s included

• Mount weather cover (1)