Overview

The Garmin 010-12165-02 is a trim piece snap cover used with compatible GPSMAP chartplotters, including the GPSMAP 7610xsv, to finish the edge around the display once it is mounted at the helm.

If the original trim piece was lost during a refit, removed for servicing, or cracked from years of vibration and sun, this replacement restores the clean, snap-on trim look without changing your electronics setup. It typically ships as a small accessory part in a box about 2 in x 2 in x 13 in.

Key features

• Snap-on trim piece cover for GPSMAP 7x10-series units, commonly listed for GPSMAP 7410, 7410xsv, 7610, and 7610xsv
• Helps tidy up the perimeter of a mounted display and replaces missing or damaged trim around the unit
• Installation accessory part only; it is not a fabric sun cover or a full screen weather cap
• Packaged as a small part (box about 2 in x 2 in x 13 in), convenient to keep onboard as a spare

Compatibility and fit

This trim piece snap cover matches the GPSMAP 7x10 housing and trim style used on models such as GPSMAP 7610xsv and related 7410 and 7610 variants. It is not interchangeable with trim from other GPSMAP sizes or generations, so confirm your exact model family before ordering.

Installation and setup

Installation is a hands-on snap fit once the chartplotter is in its mounted position. Press around the perimeter so the trim seats evenly, and avoid using metal tools near the display or helm surfaces where scratches show up fast.

Use on board

This is a practical match for helm refits, electronics service work, and boats that see frequent trailering or seasonal layup where trim pieces can get misplaced during removal and re-install. It also makes sense to keep one in the spares kit if your GPSMAP is the primary navigation display.

Maintenance and care

Rinse salt residue with fresh water and wipe with a soft cloth. Skip harsh solvents and abrasive pads, especially if the cover sits near screens, acrylic panels, or coated helm finishes.