Raymarine Desk Top Bracket, For ST40 and i40 Instruments, Aluminum, Tabletop Mount, Console Mount, Overhead Mount

Overview

The Raymarine E25024 is an aluminum desk top bracket for mounting Raymarine ST40 and i40 instruments where the display needs to be easy to see and reach. It supports tabletop, console, and overhead installation, so it works well at a helm, nav station, cockpit pod, or protected cabin position where a flush-mount opening is not the right fit.

This bracket is useful when retrofitting older Raymarine instrument displays or adding an instrument in a location that needs a raised or angled mount. The aluminum construction gives the instrument a steady base, while the included mounting hardware helps complete a clean installation without sourcing basic fasteners separately.

Key features

• Fits Raymarine ST40 and i40 instrument displays for non-flush mounting installations.
• Aluminum bracket gives the display a firm support point at the helm, console, nav station, or overhead panel.
• Allows tabletop, console, or overhead mounting, which helps place the instrument where it can be read from the normal operating position.
• Practical for refits when the existing panel layout does not suit a recessed instrument installation.
• Supplied with mounting hardware for a straightforward bracket installation.

Installation and fit

Use this bracket when the instrument needs to sit on a surface instead of being cut into a panel. Before drilling, check the display angle from the normal steering or navigation position, confirm that the instrument face remains visible in daylight, and leave enough room behind the unit for cable routing without tight bends.

For exposed cockpit or helm locations, mount the bracket on a surface that is flat, solid, and protected from unnecessary movement. A backing plate or reinforced mounting area may be appropriate on thin panels, especially on boats that see vibration, pounding, or frequent offshore use.

Use cases on board

This bracket suits boats keeping Raymarine ST40 or i40 instruments in service and needing a clean way to mount a single display outside the main dash cutout. It is a good match for sailboats, small powerboats, fishing boats, and cruising boats where instrument visibility matters from the helm or nav station.

What’s included

• Raymarine E25024 desk top bracket
• Mounting hardware