Perko 1262 Ribbed Type Rowlock Horns, Zinc Alloy, 1/2 in Shank, 1 Pair

Overview

The Perko 1262 is a pair of ribbed type rowlock horns for small boat rowing setups where a traditional horn-style rowlock is used with a matching socket. The shank has a 1/2 inch outside diameter, a 1-3/4 inch shank length, and 1-3/4 inch spacing between the horns, giving the buyer the key dimensions needed before replacing worn hardware or outfitting a dinghy, tender, utility boat, or small rowing craft.

These rowlock horns are made from zinc alloy and offered in either a plain finish or a chrome-plated finish. The ribbed horn shape helps hold the oar in place during rowing while still allowing the movement needed for normal strokes, dockside maneuvering, and short trips between boat and shore.

Key features

• Ribbed horn-style rowlock hardware for traditional oar control on dinghies, tenders, and small craft.
• 1/2 inch outside diameter shank for use with compatible rowlock sockets.
• 1-3/4 inch shank length and 1-3/4 inch spacing between horns for checking fit against existing hardware.
• Zinc alloy construction with finish options for either a plain utility look or a chrome-plated appearance.
• Supplied as a pair, making it suitable for replacing both port and starboard rowlock horns at the same time.

Variants

This product is offered in two finish configurations, so the main difference is appearance and surface finish rather than fit.

Both variants share the same confirmed rowlock horn format, zinc alloy construction, 1/2 inch shank outside diameter, 1-3/4 inch shank length, and 1-3/4 inch spacing between horns.

• 1262DP0ZNC: Plain finish. This option suits practical replacement work where a simple zinc alloy look matches the boat or the existing rowing hardware.
• 1262DP0CHR: Chrome finish. This option gives the rowlock horns a brighter plated appearance for boats where visible deck or tender hardware is kept more polished.

Installation and fit

Before ordering, measure the existing socket and old rowlock horn rather than relying on the boat model alone. The important fit checks are the 1/2 inch shank outside diameter, the 1-3/4 inch shank length, and the 1-3/4 inch opening between the horns. Matching those dimensions helps the horn sit correctly in the socket and keeps the oar positioned as expected while rowing.

These horns are a straightforward hardware replacement for compatible rowing setups. They are most useful on tenders, dinghies, and small utility boats where simple mechanical rowing hardware is preferred over plastic or folding oarlock styles.

Use cases on board

This rowlock horn pair is a good match for boat owners refreshing a tender, replacing a missing horn, or keeping spare rowing hardware aboard for a dinghy that sees regular dock, mooring, or shoreline use. The plain finish works well for functional service, while the chrome version fits better where the hardware is visible and the boat has other polished fittings.

Maintenance and care

Rinse the horns with fresh water after saltwater use and check the socket fit periodically, especially on tenders that are stored outside or used around sand, grit, and dock wash. A small amount of routine cleaning helps the shank move freely in the socket and reduces buildup around the horn ribs.

What’s included

• One pair of Perko 1262 ribbed type rowlock horns