Overview

The Garmin 010-12166-00 is a snap-on protective cover for GPSMAP 7x07 series 7-inch chartplotters. It fits GPSMAP 7407, 7407xsv, 7607, and 7607xsv units and sits over the front of the display when the unit is not being used.

On a boat, screens get scuffed during washdowns, trailering, and dockside work. This cover adds a simple barrier during storage and downtime, helping keep the face of the chartplotter cleaner and reducing the chance of scratches from day to day helm traffic.

Key features

• Custom fit for GPSMAP 7407, 7407xsv, 7607, and 7607xsv (GPSMAP 7x07 series)
• Snap-on style cover for quick on and off without tools
• Covers the display area when the unit is powered down or the boat is stored
• Helps reduce scuffs and grime from washdowns, spray, and gear moving around the helm

Installation and use

Press the cover onto the front of the chartplotter until it seats evenly around the bezel. Remove it before operating the unit, and store it where it will not get stepped on or crushed in a locker.

For best results, wipe the screen before installing the cover so trapped grit does not rub the glass while the boat is underway.

Compatibility and fit

This cover is shaped for the GPSMAP 7x07 family, including GPSMAP 7407, 7407xsv, 7607, and 7607xsv. Confirm the model number on your chartplotter before ordering if you are running a different screen size or a different GPSMAP series.

On-board use

This is a practical match for boats that live outdoors at the dock or get trailered between ramps, where the helm sees regular washdowns and sun exposure. It also helps when rods, tackle bags, and covers get stowed near the console and you want the chartplotter face protected between runs.

Maintenance and care

Rinse with fresh water after salt exposure and wipe dry. Use mild soap if needed, and avoid solvents or abrasive pads that can haze the surface.