Garmin Bail Mount with Knobs, For Signal Marine VHF Radio Series

Overview

The Garmin 010-13441-00 is a bail mount with knobs for compatible Garmin Signal marine VHF radios. It gives the radio a secure cradle-style mounting point at the helm, cabin console, wheelhouse, or other station where the VHF needs to stay visible and within reach.

This is a non-powered mounting accessory, so there is no voltage, network, or antenna connection to match during installation. The kit includes the bail mount with knobs, cradle, and mounting hardware, which makes it useful for a new install, a refit, or replacing a missing or worn mount on a compatible Garmin Signal VHF setup.

Key features

• Made for compatible Garmin Signal marine VHF radio series installations.
• Bail mount with knobs helps hold the radio in its cradle while keeping the mounting hardware accessible by hand.
• Cradle-style support helps keep the VHF radio positioned at the operating station during normal boat movement and vibration.
• Non-powered accessory with no 12V, 24V, NMEA, or antenna wiring to integrate.
• Suitable for helm, console, cabin, or wheelhouse mounting locations where the compatible radio can be reached quickly.

What’s included

• Bail mount with knobs for the Garmin Signal marine VHF radio series
• Cradle
• Mounting hardware

Installation and fit

Before drilling, place the radio in the cradle and check the sight line, microphone access, cable routing, and knob clearance. A VHF radio is handled often during docking, fishing, cruising, and emergency communication, so the mount should sit where the display and controls are easy to use without blocking other electronics.

Compatibility notes

Match this mount to the Garmin Signal marine VHF radio series rather than treating it as a universal VHF bracket. It is a good fit for owners replacing the original mount, adding a clean mounting point during a refit, or finishing a new Garmin Signal VHF installation with the correct cradle and hardware.