Overview

The Garmin 010-11976-00 is a trim piece snap cover that replaces the front trim bezel on Garmin GPSMAP 741 and GPSMAP 741xs chartplotters.

It snaps into place around the mounted unit to restore the finished edge at the helm when the original trim has been lost or damaged. This is a fit-specific trim part, so confirming the exact GPSMAP model is the key step before ordering.

Key features

• Replacement trim bezel and snap cover for GPSMAP 741 and GPSMAP 741xs units
• Installs after the chartplotter is mounted, finishing the edge around the front of the unit
• Snap-on piece meant to replace missing or cracked trim without changing wiring or mounts
• Helps cover the mounting cutout edge for a cleaner dash finish

Compatibility and fit

Compatible with Garmin GPSMAP 741 and GPSMAP 741xs models. Check the unit’s model name in the settings menu or on the product label before ordering, especially if your boat has more than one Garmin display at the helm.

Installation and setup

With the chartplotter already installed, align the trim piece to the front perimeter and press evenly until it seats. If the panel opening has raised edges, sealant, or debris, cleaning the area first helps the trim sit flat and snap in cleanly.

Use on board

This part is a good match for owners replacing a missing bezel after a refit, transport, or helm service work. It also suits boats that see frequent washdowns and cover removals where small trim pieces can get knocked loose over time.