Overview

The Garmin 010-12799-00 is a plastic protective cover made for 10 in GPSMAP chartplotters, keeping the screen and bezel covered when the unit is not in use. It fits GPSMAP 8410, 8410xsv, 8610, and 8610xsv displays.

Use it at the helm between trips, at the dock, or during storage to keep the display face protected from scratches and everyday grime. It is meant to be installed when the unit is off and removed when you are navigating or operating the touchscreen.

Key features

• Compatibility: Garmin GPSMAP 8410, 8410xsv, 8610, and 8610xsv 10 in displays
• Rigid plastic cover that shields the display face from scuffs while the boat is unattended
• Helps keep spray residue and dust off the screen so it needs less wiping before you get underway
• Simple on and off protection for fixed-mount helms on boats stored in a slip or on a trailer

Compatibility and fit

This cover is sized specifically for GPSMAP 8410, 8410xsv, 8610, and 8610xsv. If your plotter is a different GPSMAP model, even at 10 in, the front shape can vary, so match the model name on the unit before ordering.

Installation and day-to-day use

Before installing, wipe off grit from the bezel and screen so the cover goes on cleanly. Press the cover into place over the front of the display and confirm the edges sit evenly all the way around.

Use cases on board

It is a practical add-on for open helms, center consoles, and cockpits where electronics stay exposed between runs. It also helps during trailering and winter layup when gear tends to rub against the face of the display.

Maintenance and care

Rinse with fresh water and wipe with a soft cloth as needed. Avoid harsh cleaners that can haze plastics and store the cover dry when the boat is put away.