TACO Marine SuproFlex Medium Rub Rail Kit, 2 in x 29/32 in, Co-Extruded Vinyl

Overview

The TACO Marine SuproFlex Medium Rub Rail Kit is a semi-rigid vinyl rub rail kit for medium boats that need hull-side protection with a clean finished edge. It measures 2 inches high by 29/32 inch wide and is offered in 60-foot and 80-foot kit lengths, giving boat owners and installers options for matching the run around the hull.

SuproFlex uses co-extruded vinyl with two hardness levels, pairing a rigid backing with a softer front face that helps absorb everyday contact from docks, pilings, and rafting alongside other boats. The profile comes in a continuous coil, so it can follow most hull shapes without pre-forming and with only minimal heat needed for bends.

This medium kit is a practical match for center consoles, bay boats, and similar boats in the 22 to 30-foot range where a full rub rail replacement or clean refit is needed. It is also predrilled for fasteners, with #10 screws spaced 4 inches on center, which helps keep installation layout consistent along the hull.

Key features

• 2-inch by 29/32-inch SuproFlex medium rub rail profile for rub rail replacement and refit work on many mid-size boats.
• Co-extruded vinyl construction combines a rigid backing with a softer front face for impact absorption along the hull edge.
• Shock-absorbing channels help manage dock contact, trailer handling, and light side impacts during normal boat use.
• Continuous coil format reduces joints and helps the rail follow curved hull sections with less installation work.
• No pre-forming required, with minimal heat needed for bends during fitting.
• Predrilled for #10 fasteners at 4-inch centers for cleaner spacing during installation.
• Pairs with the included V12-0307 insert, with insert color matched to the selected variant.
• Includes stainless-steel end caps and screws for a complete rub rail kit installation.
• Made in the USA and backed by a 5-year limited warranty.

Variants

This SuproFlex Medium Rub Rail Kit is offered in multiple configurations so the rail length and visible color can be matched to the boat and the refit plan.

The profile size, SuproFlex construction, predrilled fastener layout, included insert family, stainless-steel end caps, screws, USA manufacture, and 5-year limited warranty are consistent across these variants. The differences are the kit length, rub rail color, and insert color used with the selected finish.

• V11-9990BBK60-2: Black, 60-inch length option. This version uses a black rub rail with a Flex Chrome insert, giving the hull edge a darker base with a bright accent line.
• V11-9990WCM60-2: White, 60-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert, a common look for boats with white gelcoat and bright trim.
• V11-9990BBK80-2: Black, 80-inch length option. This version keeps the black rub rail and Flex Chrome insert combination while allowing more length for a larger perimeter run.
• V11-9990GRD80-2: Grey, 80-inch length option. This version uses a gray rub rail with a gray insert for a more uniform finish along the hull side.
• V11-9990WCM80-2: White, 80-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert and provides the longer kit length for boats that need the additional run.

Installation and fit

For a clean installation, the old rail and fasteners should be removed, the mounting surface cleaned, and the new SuproFlex coil worked around the hull before final fastening. Because the rail is flexible and does not need pre-forming, it is easier to manage around common bow and transom curves than many traditional vinyl rub rails.

The predrilled layout helps maintain even fastener spacing, but the installer should still confirm alignment, end cap placement, and insert seating before the final pass. As with any rub rail replacement, the selected kit length should be checked against the boat’s actual perimeter, including any allowance needed for trimming and end finishing.

Use on board

This kit suits owners restoring worn rub rail, repairing impact-damaged trim, or refreshing the look of a center console, bay boat, or similar hull. It is especially useful where the boat sees regular dockside contact, raft-ups, trailer loading, or tight marina handling.

The finish options make it easier to keep the replacement close to the boat’s existing style. Black and Frosty White versions include a Flex Chrome insert for a brighter trim line, while the gray version keeps the insert color matched to the rail for a subtler look.

What’s included

• SuproFlex medium rub rail coil in the selected color and length
• V12-0307 insert in the color supplied with the selected variant
• Stainless-steel end caps
• Screws