-
Blue Sea Systems PowerBar BusBar Cover, For 2104, Polycarbonate
OverviewThe Blue Sea Systems 2708 is a busbar cover sized for the Blue Sea Systems PowerBar 2104. It measures 8.500 x 3.375 x 2.750 inches and fits over the 2104 busbar to put a physical barrier over...$37.99 -
Blue Sea Systems Battery Terminal Mount BusBars, 100A, 32V, Tin-Plated Copper
OverviewThe Blue Sea Systems 2340 is a battery terminal mount busbar set that adds positive and negative connection points directly at a threaded-post battery terminal. It is rated for 32V DC and...$38.99 -
Blue Sea Systems PowerBar Dual BusBar, 200A, 48V DC, Two 3/8"-16 Studs, Tin-Plated Copper
OverviewThe Blue Sea Systems 2020 is a compact DC power busbar for bringing two heavy-current cable terminations to one common connection point on board. It uses two 3/8"-16 studs, is rated up to...$25.99 -
Blue Sea Systems PowerBar Dual BusBar, 200A, 48V DC, 3/8"-16 Studs, Tin-Plated Copper, With Insulators
OverviewThe Blue Sea Systems 2019 is a dual-stud common busbar for creating a single high-current connection point in DC systems up to 48V. It uses two 3/8"-16 studs and carries up to 200A, so it...$34.99 -
Sold out
Blue Sea Systems M2 OLED Temperature Monitor, 7-70V DC, Up to 4 Sensors, -40°C to 120°C
OverviewThe Blue Sea Systems 1841 is a panel-mounted OLED temperature monitor for tracking up to four temperature points on board. It runs on 7 to 70V DC, reads from -40°C to 120°C (-40°F to 250°F),...$393.14Out of stock
-
Blue Sea Systems High Temp Temperature Sensor, IP65, -40°F to 300°F, 18 in Wire
OverviewThe Blue Sea Systems 1821 is a high-temperature sensor for monitoring raw water exhaust temperature on a boat without drilling into the pipe. It mounts on the outside of the surface being...$23.99 -
Blue Sea Systems Submersible Temperature Sensor, 10,000 Ohm, IP68
OverviewThe Blue Sea Systems 1820 is a submersible temperature sensor for Blue Sea devices that accept a temperature input. It is rated IP68, uses a 10,000 Ohm sensor at 25°C, and covers a working...$29.99 -
Sold out
Blue Sea Systems VSM 422 Tank Sender, Gasoline, 24 in Tank Depth
OverviewThe Blue Sea Systems 1811 is a gasoline tank sender for the Vessel Systems Monitor VSM 422. It uses non-contact ultrasonic sensing, can be calibrated for the individual tank through the...$218.99Out of stock
-
Blue Sea Systems VSM 422 Ultrasonic Tank Sender, For Diesel, Water and Waste Tanks, 32 in Tank Depth
OverviewThe Blue Sea Systems 1810 is an ultrasonic tank sender for diesel, water, and waste tanks used with the Vessel Systems Monitor VSM 422. It reads tank level without internal moving parts in...$174.99 -
Blue Sea Systems Marine-Grade Dual GFCI Receptacle, 20A, 125V AC, Self-Testing, Class A 5mA
OverviewThe Blue Sea Systems 1698 is a dual GFCI receptacle for 125V AC circuits on board, with a 20A rating and a Class A trip level of 5 mA plus or minus 1 mA.It gives continuous ground fault...$93.99 -
Blue Sea Systems 360 Panel M2 Monitor Panel Blank, For M2 Monitors, 1 x 1
OverviewThe Blue Sea Systems 1525 is a 1 x 1 360 Panel System module that mounts an M2 Monitor and matches existing 360 panels. Its listed size is 4.75 in high by 4.88 in wide, which gives you a...$79.99 -
Blue Sea Systems 360 Panel Dual Bilge Pump Control, 12V DC
OverviewThe Blue Sea Systems 1522 is a 12V DC control panel for two bilge pumps, with a compact 4.75 in. by 4.88 in. face size that fits neatly into a helm or electrical panel layout. It brings...$441.99