Raymarine Radar Mast Mount, White Powder-Coated Aluminum, Pre-Drilled

Overview

The Raymarine Radar Mast Mount is a white aluminum mast bracket for mounting a Raymarine radome scanner on a sailing mast, with configurations for 18-inch and 24-inch domes. The 18-inch version is for a 456 mm radome scanner, while the 24-inch version is for a 608 mm radome scanner, giving buyers a clear fit point before installation.

This mount keeps the radar antenna positioned above deck obstructions, which is important on sailboats where standing rigging, spars, and deck hardware can interfere with a clean radar installation. It attaches to the mast with four swivel feet so the bracket can sit against different mast profiles, and the 12-point fixing uses Monel rivets for a secure mechanical hold.

Key features

• White aluminum mast-mount bracket for Raymarine radome scanner installations on sailing masts
• Available for 18-inch (456 mm) and 24-inch (608 mm) radome scanner sizes
• Four swivel feet help the bracket match a range of mast profiles
• 12-point fixing with Monel rivets for a secure mast attachment
• Nylon washers help protect the mast finish around the fasteners
• Waterproof cable grommet supports a cleaner cable entry into the mast
• Gloss white polyester powder-coated finish for exposed marine mounting locations

Variants

This radar mast mount is offered in two configurations matched to Raymarine radome scanner size.

The main difference between the variants is radome capacity. The mounting concept, mast attachment style, white aluminum construction, swivel feet, 12-point fixing, cable grommet, and powder-coated finish remain consistent across the range.

• M92698: Capacity 24 Domes, for 24-inch (608 mm) Raymarine radome scanner installations. This is the larger dome option for vessels using the 24-inch Raymarine radome format.
• M92722: Capacity 18 Domes, for 18-inch (456 mm) Raymarine radome scanner installations. This is the smaller dome option for vessels using the 18-inch Raymarine radome format.

Installation and fit

This bracket is intended for mast mounting rather than deck or pole mounting. On a sailboat, that helps place the radome where it has a clearer view around the vessel while keeping the installation away from busy deck areas.

During installation, the selected variant should match the radome size being fitted. The mast profile, cable route, and clearance around rigging should be checked before drilling, especially on older spars or masts with internal wiring already in place.

Use on board

This mount is a practical match for cruising sailboats and offshore sailing setups that need a fixed radome position on the mast. It is most relevant for owners replacing an existing Raymarine radome mount or setting up a Raymarine radar installation where the radome needs to sit clear of deck hardware and common obstructions.