Overview

The Vimar Arké 19060 is a 2P 10 AX 250 V~ two-button 2-way switch with 6 terminals, directional arrows, and a central OFF position. It works well where a circuit needs a clearly marked directional command instead of a simple on or off switch, which can be useful on a boat when a control needs an up and down or open and close layout.

All three versions share the same switch function and electrical rating, with the visible finish changing between grey, metal, and white. For circuits using self-ballasted lamps, the connected load should stay within 100 W. This is part of the Arké wiring device range, so it should be matched with the correct Arké installation hardware already used in the panel or cabin fit-out.

Key features

• 2P 10 AX 250 V~ switch rating with 6 terminals
• Two-button layout with directional arrows and a central OFF position
• Same switch function across all variants, with finish options in grey, metal, and white
• Part of the Vimar Arké device range for coordinated replacement in existing Arké installations
• Maximum 100 W load when used with self-ballasted lamps

Variants

This product is offered in three finish options within the same Arké 19060 switch format.

The switch function, 250 V~ rating, two-button layout, 6-terminal wiring, directional arrows, and central OFF position stay the same across the range. The visible finish is what changes between variants.

• VM19060.B / Color White. White finish for lighter interiors and switch plates where a cleaner visual match is preferred.
• VM19060.M / Color Metal. Metal finish for installations that use metallic trim or a more technical panel appearance.
• VM19060 / Color Grey. Grey finish for panels and cabin spaces that use darker surrounding hardware.

Compatibility and fit

This switch belongs to the Vimar Arké modular range, so fit depends on the rest of the Arké support, frame, and cover plate system already installed. That matters most when replacing one failed device in an existing multi-gang panel and keeping the same look across the boat.

The listed electrical rating is 250 V~ AC. If your vessel uses 12V or 24V DC switching for helm or service circuits, check the circuit type and switching duty before fitting this part, because the stated rating here is for AC wiring.

Installation and setup

The 6-terminal layout and the central OFF function need to match the intended circuit logic during wiring. On board, this type of device makes the most sense in protected interior locations such as cabins, enclosed consoles, and utility areas where a directional control needs clear visual marking.

It is a sensible replacement part for refits where the boat already uses Vimar Arké devices and the goal is to restore the original switch function without changing the rest of the visible hardware.