Overview

The Lumitec 101732 is a black Capri3 retrofit kit that lets you install a Capri3 light in the recessed opening left by the previous line of Capri lights.

It uses the same spring clip mounting style as the Capri3 fixture, so the face stays free of exposed screws and sits flush on the mounting surface.

This is the right fit when you are updating an older Capri spreader or deck light location and want the Capri3 look without rebuilding the cutout.

Key features

• Retrofit adapter for installing a Capri3 flush-mount light where an earlier Capri light was previously recessed
• Spring clip mounting matches the Capri3 fixture, keeping the front face free of exposed screws
• Seats into the existing recess for a flush look on hardtops, towers, and arches
• Black finish to match black-housing Capri3 lights

Compatibility and fit

This retrofit kit is intended for recessed openings created by the earlier Capri light line. If the opening has been modified, repaired, or cut for a different fixture, fit can vary.

It is used as the mounting interface for a Capri3 light, so confirm the Capri3 model you are installing matches your wiring and control setup before starting the swap.

Installation and setup

After removing the old light, clean out old sealant and debris so the retrofit kit can sit flat in the recess. The Capri3 light then locks in using the spring clips, which keeps the exterior face smooth and serviceable later.

Any wiring work happens at the light, not the retrofit kit. If the cutout exposes laminate, core, or fastener holes from a previous install, reseal and protect the area before snapping the new light into place.

Use on board

This style of upgrade is common at spreader and deck-light locations that see washdowns and vibration. A screw-free front helps reduce places where salt can collect and keeps the install looking tidy.

It is a good match for owners refreshing older Capri installations who want to move to the Capri3 platform while keeping the same recessed footprint in the mounting surface.