Overview

The Garmin 010-12941-01 is a cart-style strap mount for Garmin devices that use a spine mount, letting you secure the unit to square tubing from 1 to 1.25 inches (2.5 to 3.2 cm) or round tubing from 1.2 to 2 inches (3 to 5 cm). It uses a hook-and-loop strap, so it goes on fast and comes off without tools.

On a boat, this kind of mount is handy for rail and tube mounting when you do not want to drill, such as a console grab rail, cockpit pedestal guard, T-top support, or a tubular tender console. It also works well when you move a handheld between stations and want one mount that can follow the device.

Key features

• Fits square tubing: 1 to 1.25 inches (2.5 to 3.2 cm)
• Fits round tubing: 1.2 to 2 inches (3 to 5 cm)
• Hook-and-loop strap mounting for quick install and removal without tools
• Works with compatible Garmin devices that have a spine mount attached
• Strap-on approach supports rail mounting where you want to avoid drilling into the boat

Installation and setup

Wrap the strap around the tube, snug it down, and position the device so the screen is easy to read from your normal helm stance. On open boats, it helps to pick a spot that keeps the unit clear of lines, rod butts, and frequent handholds.

Compatibility and fit

This mount relies on the Garmin spine mount interface, so the device needs a spine mount on the back to attach properly. If you are using an inReach Mini 2, it requires a spine mount adapter to work with this mount.

Before ordering, measure the rail where you plan to mount: square tube must fall within 1 to 1.25 inches, and round tube must fall within 1.2 to 2 inches.

Maintenance and care

In saltwater use, a quick rinse helps keep the strap closure free of salt and grit. Give the strap a quick check before getting underway, especially if the mount is on a rail that sees spray or vibration.