TACO Marine 1-Drink Poly Cup Holder, Suction Cup Mount, White UV-Stabilized HDPE

Overview

The TACO Marine P01-2003W is a white poly 1-drink holder with suction cup mounting for keeping a tumbler, insulated drink holder, or mug within reach on board. It is sized for one full-size drink and supports common 16 to 30 oz tumblers, making it useful at the helm, cockpit, leaning post, console, or dockside seating area where a built-in cup holder is not available.

The holder is made from UV-stabilized high-density white polyethylene for use in sun and spray, with an easy-to-clean surface that suits fishing boats, center consoles, pontoons, and cruising boats. Its approximate dimensions are 4-5/8" wide x 3-1/2" high x 4-3/4" deep, so it can fit in tight deck and cockpit areas without taking over the space.

Suction cups let the holder be moved as needed, while hidden fasteners help keep the face clean when mounted. The recessed bottom has drain holes, and the accessory-ready layout includes a mobile device cutout with space for a charging cable.

Key features

• Holds one full-size insulated drink holder, mug, or 16 to 30 oz tumbler for practical use around the helm, cockpit, or fishing area.
• White UV-stabilized high-density polyethylene helps the holder handle sun exposure and the normal saltwater boating environment.
• Suction cups are included for portable mounting on suitable smooth surfaces.
• Hidden fasteners keep the installed look clean when the holder is mounted in place.
• Recessed bottom with dual drain holes helps water escape instead of pooling under the drink.
• Mobile device cutout and charging cable port add a useful place for a phone while keeping a drink secure nearby.
• Made in the USA.

Installation and placement

This holder works well where a permanent cup holder would be inconvenient or where the crew needs a removable drink station during fishing, cruising, or time at anchor. The suction cup mount is best used on clean, smooth, non-porous surfaces so it can grip properly.

For a fixed installation, confirm the mounting surface has enough flat area for the holder footprint and enough clearance for the tumbler or mug used on board. Avoid mounting it where it can interfere with controls, lines, hatches, walking paths, or electronics.

Use cases on board

This is a good match for small cockpits, center consoles, pontoon seating areas, and fishing stations that need drink storage without cutting into the boat. The white finish blends naturally with many fiberglass interiors and console layouts, while the removable format helps when the deck needs to be cleared for cleaning or fishing work.

Maintenance and care

Rinse the holder with fresh water after saltwater use and wipe away sunscreen, fish residue, and spilled drinks before they dry on the surface. Check the suction cups before each use and clean both the cups and mounting surface so the holder stays seated during normal boat movement.

What’s included

• 1-drink poly holder
• Suction cups