TACO Marine 4-Rod Bungee Rod Holder, Pair, White UV-Stabilized HDPE

Overview

The TACO Marine P03-134W is a pair of white 4-rod bungee rod holders for under-gunnel storage on fishing boats, pontoons, and other boats where rods need to stay organized but easy to reach.

Each holder is made from UV-stabilized high-density polyethylene and uses bungee cords to keep rods seated while the boat is underway or while gear is stored between trips. The set includes two mounts, with each mount measuring 15-5/8 inches long, 3-3/4 inches deep, and 1/2 inch thick.

This rack is a practical fit for anglers who want to move rods off the deck, reduce clutter near the cockpit, and keep reels and rod blanks from sliding around under the gunnel.

Key features

• Stores four rods across a pair of under-gunnel bungee holders.
• White UV-stabilized high-density polyethylene construction suits exposed boat storage areas.
• Bungee cords help keep rods in place during normal movement on board.
• 15-5/8 inch length, 3-3/4 inch depth, and 1/2 inch thickness help confirm fit before drilling.
• Mounting backing plates and hardware are included for installation.
• Made in the USA and backed by a 1-year limited warranty.

Installation and setup

The holder mounts to a flat area under the gunnel or another suitable onboard storage location. Check the available length and depth before drilling, and make sure the chosen surface gives enough clearance for rod tips, reels, and bungee access.

The small mounting bracket is positioned on the back of the rod holder, pilot holes are drilled, and the bracket is fastened to the holder with the supplied fasteners. The assembled holder can then be positioned at the mounting location and drilled in place as needed.

Use cases on board

This rack works well for keeping trolling, casting, or spare rods off the cockpit sole during coastal fishing, dockside rigging, or days when multiple anglers are moving around the boat. It is also useful for boats with limited vertical storage where under-gunnel space is easier to reach.

What’s included

• Two 4-rod bungee rod holder mounts
• Mounting backing plates
• Mounting hardware