Overview

The Garmin BlueChart g3 Vision HD VEU065R is an electronic chart covering the Baltic Sea, East Coast for use on compatible Garmin marine chartplotters. Coverage spans the coasts of Estonia, Latvia, Lithuania, Russia, and Poland from Kunda, Estonia to Rügen, Germany, and includes areas such as Gotland, Bornholm, the Gulf of Riga, Kaliningrad, and key Polish ports including Gdansk, Gdynia, and Szczecin.

This chart set includes tools that help you read the water with less guesswork, including Depth Range Shading (up to 10 depth ranges), Shallow Water Shading at a user-defined depth, and 1-foot contours for a tighter view of bottom structure. On supported systems, Auto Guidance can calculate a suggested route based on your preferred depth and overhead clearance, and 3D perspectives like FishEye and MarinerEye add another way to interpret approaches and contours.

Key features

• Baltic Sea, East Coast coverage from Kunda (Estonia) to Rügen (Germany), including Gotland, Bornholm, the Gulf of Riga, Kaliningrad, and Polish ports such as Gdansk, Gdynia, and Szczecin
• Auto Guidance route suggestions based on the depth and overhead clearance settings you enter on the plotter
• Depth Range Shading with up to 10 depth ranges for quick target-depth viewing
• Shallow Water Shading at a user-defined depth to help highlight areas you want to avoid
• 1-foot contours for more detailed bottom structure display
• 3D chart views, including FishEye and MarinerEye, for additional perspective above and below the waterline

Variants

This chart coverage is offered in multiple configurations so you can match the BlueChart version and the delivery format used on your system.

Across the variants, the BlueChart version changes between BlueChart g3 Vision and BlueChart g3, and the format changes between an SD Card and a Download.

• 010-C0849-00: BlueChart g3 Vision, SD Card. A physical microSD/SD card format that stays in the chartplotter while you are using the chart.
• 010-D0429-00: BlueChart g3 Vision, Download. A digital format intended to be loaded for use on supported Garmin marine hardware.
• 010-C0849-20: BlueChart g3, SD Card. A physical microSD/SD card format that stays in the chartplotter while you are using the chart.
• 010-D0581-00: BlueChart g3, Download. A digital format intended to be loaded for use on supported Garmin marine hardware.

Compatibility and fit

Confirm your chartplotter supports the BlueChart version you are purchasing and has a microSD/SD card slot available for chart data. If your boat has more than one display, check how your system handles chart cards across networked units so the chart is accessible where you need it at the helm.

Installation and setup

For SD Card versions, insert the card into the plotter and select the chart layer from the chart page. For Download versions, follow the supplied download steps to load the chart data for use on your Garmin system, then make sure the chart data is available from the plotter where you plan routes and navigate.

Before relying on route suggestions, enter your vessel details and safety margins in the plotter so features like Auto Guidance and depth-related shading reflect your draft and clearance needs. These tools help with planning, but they do not replace local knowledge, updated notices, and a proper watch.

Use on board

This coverage is a good match for boats cruising or fishing along the Baltic coast and moving between islands and ports where depth changes and approach detail matter. It is also helpful when hopping between harbors in unfamiliar areas, where shading, contours, and 3D views can make the chart picture easier to interpret at a glance.