Raymarine SeaTalk HS Dual End Weatherproof Network Cable

Overview

The Raymarine SeaTalk HS Dual End WeatherProof Network Cable is a weatherproof marine network cable for linking compatible Raymarine SeaTalk HS equipment on board. It is offered in 1.5 m and 15 m lengths, giving installers a short option for close device runs and a longer option for routing between helm displays, network equipment, radar locations, or sonar modules where the cable path needs more reach.

This cable uses waterproof connectors at both ends to help protect the network connection in exposed marine spaces where spray, damp lockers, washdowns, and vibration are part of normal use. It is a practical fit for Raymarine SeaTalk HS installations where a secure cable connection matters as much as the device itself.

Key features

• SeaTalk HS network cable for compatible Raymarine marine electronics and accessories.
• Waterproof connectors on both ends help protect the connection in damp or exposed onboard locations.
• Available in 1.5 m and 15 m lengths to suit short console runs or longer routing through the boat.
• Useful for clean installations where cable length needs to match the actual path rather than leaving excess cable coiled behind equipment.
• Supports marine networking layouts used with compatible Raymarine displays, radar equipment, and sonar modules.

Variants

This cable is offered in two length configurations for different installation layouts.

The connection type and SeaTalk HS product family remain the same across the range, while the cable length changes to match the distance between connected Raymarine devices.

• A62245: 1.5 m length. This shorter cable suits close equipment runs, such as connections behind a helm, inside an electronics box, or between nearby network components.
• A62246: 15 m length. This longer cable suits extended routing through the boat, such as runs between a helm station and equipment mounted farther away.

Installation and setup

Plan the route before pulling the cable so the connectors are not forced through tight turns or strained behind the equipment. Leave enough service loop for future access, but avoid large coils where they can interfere with other wiring or collect moisture.

For exposed or semi-exposed areas, position the connectors where they are supported and protected from repeated movement. Keeping the connection clean, dry when assembled, and free from strain will help maintain dependable network communication over time.

Compatibility and fit

This cable is for Raymarine SeaTalk HS networking applications. It is intended for installations using compatible Raymarine equipment, so the main fit check is confirming that the connected devices use the SeaTalk HS waterproof network connection and that the selected length matches the actual cable run.

It is a good match for boat owners, installers, and refit projects that need a Raymarine network cable with waterproof ends rather than a generic data cable.