Attwood Marine Lock'N-Pin 3/4 in Pedestal Kit, 11 in Post, 7 x 7 in Base Plate

Overview

The Attwood Marine Lock'N-Pin 3/4 in. pedestal package is a fixed-height boat seat pedestal kit with an 11 in. post, a 7 in. x 7 in. base plate, and a seat mount with spring for a complete seat support setup.

This package uses Attwood's 3/4 in. Lock'N-Pin system, which helps prevent unintentional separation between the seat mount, post, and base. It is a practical fit for fishing seats, helm seating, and general boat seating where a simple fixed pedestal is preferred over an adjustable pedestal.

The non-threaded base plate and pin-style post make this kit suitable for new installations or replacement work where the boat already uses compatible 3/4 in. Lock'N-Pin seating hardware.

Key features

• 3/4 in. Lock'N-Pin seating system helps keep the seat mount, post, and base connected during normal boat use.
• 11 in. fixed-height post gives the seat a stable, low-profile position for casting decks, cockpits, and smaller helm areas.
• 7 in. x 7 in. base plate spreads the mounting footprint across the deck or seat platform.
• Seat mount with spring is included, so the package supplies the main pedestal components needed below the boat seat.
• ABYC Code B rating supports use in appropriate marine seating locations when installed with compatible hardware and a sound mounting surface.
• Lock'N-Pin components should be matched with compatible Attwood Lock'N-Pin parts rather than mixed with other pedestal systems.

Variants

This pedestal package is offered in two finish configurations. Both versions share the same Lock'N-Pin 3/4 in. pedestal format, 11 in. post height, and 7 in. x 7 in. base plate format.

The finish is the visible difference between the variants, so the choice mainly affects how the pedestal looks against the deck, seating, and surrounding hardware.

• 97749-7: Brushed Aluminum finish. This finish suits boats with silver-toned hardware, aluminum decks, or seating layouts where a clean metal look fits the cockpit or casting area.
• 97749C-7: Camouflage Aluminum finish. This finish gives the pedestal a more subdued look for hunting boats, jon boats, and fishing layouts with camouflage or darker deck finishes.

What’s included

• 11 in. 3/4 in. pedestal post
• Seat mount with spring
• 7 in. x 7 in. non-threaded base plate

Installation and fit

Install the base plate on a flat, reinforced mounting surface using suitable marine fasteners for the deck material. The seat, mounting hardware, and backing support should be checked before installation, especially on thin aluminum decks or fiberglass panels where seat loads can concentrate around the fasteners.

This kit is a good match for boat owners replacing a worn 3/4 in. Lock'N-Pin pedestal or setting up a fixed seat position on a fishing boat, utility boat, or small runabout. Confirm the seat mount pattern, pedestal height, and base location before drilling, and avoid mixing this system with non-compatible pedestal parts.