Overview

The Raymarine A80224 is a 4 m transducer extension cable for the CPT-60 Dragonfly transducer. It adds 4 m (13.1 ft) to the existing cable run, which helps when a transom-mounted transducer needs to reach a console or helm location without moving the transducer itself.

This is a practical accessory for boats where the original cable comes up short after a refit, a display move, or a change in routing. The main fit point to confirm before ordering is that your system uses a Raymarine CPT-60 transducer and that the extra 4 m matches the real cable path on board.

Key features

• Adds 4 m (13.1 ft) of extra reach to the transducer cable run
• Made for use with the Raymarine CPT-60 Dragonfly transducer
• Useful when the transducer is mounted aft and the display is farther forward at the console or helm
• Helps finish a cleaner cable route during refits, display moves, or rerouting work

Compatibility and fit

This cable is meant for CPT-60 installations where the system is otherwise correct and the only issue is reach. It is not a transducer or a display cable, so it suits boats that already have the CPT-60 in service and simply need another 4 m in the run.

Installation and routing

Measure the full route before ordering, not just the straight-line distance. On a boat, the path usually includes bends, rigging tubes, liners, splashwell detours, and a little service loop at each end, so the real run is often longer than it first appears.

This cable is a sensible match for owners sorting out cable reach on center consoles, small fishing boats, and other layouts where the transducer sits well aft. It also works well when the display position has changed but the CPT-60 transducer location is staying the same.