Overview

The Vimar Idea 16361 is a 9-pin SUB-D socket connector module that brings a DB9-style connection to a flush-mounted position within the Vimar IDEA wiring device system. It takes up 2 modules and has an IP20 protection level for protected interior locations.

This is a solder-termination connector intended for D-sub-miniature use, so it suits custom harnesses and permanent panel installations where you want a clean, finished access point at a bulkhead or console. The body is thermoplastic and halogen-free, with a matt face finish.

Overall device size is 49.80 mm wide, 50.10 mm high, and 34.40 mm deep behind the panel. The front is a simple connector face with no dust cover or hinged lid, which keeps access straightforward but also means placement matters in areas where spray, grime, or accidental contact are concerns.

Key features

• 9-pin SUB-D (D-sub-miniature) socket connector with solder terminals
• IDEA modular format, sized as a 2-module device
• IP20 rating for dry, protected interior panels
• Thermoplastic construction that is halogen-free, with a matt face finish
• Plain connector face without support ring, dust cover, hinged lid, imprint, or strain relief
• Device dimensions: 49.80 mm (W) x 50.10 mm (H) x 34.40 mm (D)

Variants

This socket connector is offered in two color configurations to match different IDEA trims.

The connector format, module size, and installation method stay the same; the visible face color is what changes between versions.

• VM16361.B: Color Ivory. A warm white tone (similar to RAL 9001) that blends well with lighter interior switchgear and classic cabin finishes.
• VM16361: Color Gray. A darker grey tone (similar to RAL 7015) that pairs neatly with modern panels and darker trim colors.

Compatibility and fit

This is a flush-mounted modular device for the Vimar IDEA system and occupies two modules in the frame, so it needs an IDEA-compatible opening and mounting support sized for 2 modules. Match it with the correct IDEA frame and back box or panel-mount adapter used on your boat.

Functionally, it is for equipment that uses a 9-pin SUB-D interface. Before cutting or committing to a location, confirm the mating plug type, cable exit direction, and the pinout required by your electronics.

Installation and setup

Because termination is by soldering, allow enough working room behind the panel for clean joints and inspection. Since there is no built-in strain relief, secure the cable to the back box or nearby structure so vibration and tugging do not load the soldered connections.

IP20 means this connector belongs in protected interior spaces such as a nav station, cabin bulkhead, or an enclosed console. Avoid exposed cockpits, deck panels, or lockers that see spray or washdowns.

Use on board

This is a sensible choice for refits where you want a flush, finished DB9 access point at a navigation desk, instrument console, or service panel, especially when working with legacy serial devices, adapters, or test connections that still use SUB-D connectors.