Raymarine Axiom 2 Pro 9 Silicon Suncover

Overview

The Raymarine A80741 is a silicone suncover for Raymarine Axiom 2 Pro 9 multifunction displays. It is made for all Axiom 2 Pro 9 models, giving the display face a proper cover when the helm is not in use.

This is a simple but important replacement or spare part for exposed helm stations, cockpit electronics, flybridges, and fishing boats where the display may sit in sun, spray, dust, or general dockside exposure between runs. It is a cover accessory only, with no wiring, network connection, software setup, or mounting hardware required.

Key features

• Fits all Raymarine Axiom 2 Pro 9 models.
• Silicone cover construction helps shield the display face when the unit is powered down or the boat is stored.
• Useful as a replacement for a missing or worn Axiom 2 Pro 9 suncover.
• No electrical connection, NMEA integration, or configuration is needed.
• Accessory type: display cover for marine navigation electronics.

Compatibility and fit

This suncover is for the 9-inch Axiom 2 Pro display family. It is not the cover for Axiom 2 Pro 12 or Axiom 2 Pro 16 units, and it should not be selected for other Axiom display sizes unless the vessel already has an Axiom 2 Pro 9 installed.

For the best fit, check the model marking on the display before ordering. Matching the cover to the exact display size matters, especially on bracket-mounted or flush-mounted helm installations where clearance around the screen may be tight.

Use on board

This cover suits boats where the chartplotter is left installed at the helm between trips, including center consoles, cruisers, pilothouse boats, and sailboats with exposed cockpit electronics. It helps keep the display face covered during storage, trailering, dockside periods, and between fishing runs.

Care and handling

Rinse salt and grit from the cover before wiping it down, especially after spray or washdowns. Let the display and cover dry before long storage so trapped moisture is not left against the screen.