Overview

The Vimar VM19101 is a 1-pole, 1-way axial switch mechanism for the Arké modular system, rated 16 AX at 250 V~ and suitable for loads up to 200 W for self-ballasted lamps.

It takes up two modules in a Vimar Arké frame and sits behind your chosen cover plate to build consistent switch banks around the boat, such as at a cabin entry panel, at the helm console, or in a galley switch cluster. The axial rocker action feels familiar in use, and the button is replaceable, which helps when you are matching surrounding devices or updating legends during a refit.

This is a standard in-panel switching mechanism, so plan to mount it in a protected location inside an electrical panel or enclosure, away from direct spray and routine washdowns.

Key features

• 1P/1-way (on/off) switching for controlling a single circuit from one location
• 16 AX, 250 V~ rating; supports up to 200 W self-ballasted lamps
• 2-module format to lay out multi-gang panels within the Vimar Arké modular system
• Lightable mechanism so a compatible locator or indicator light can be added when needed
• Replaceable rocker button for cleaner labeling and a consistent look across the panel

Installation and setup

This mechanism installs into a Vimar Arké mounting frame and back box like other Arké devices, then is finished with a matching cover plate. Wiring is the standard 1-way arrangement (line in and switched line out); verify conductor sizing and overcurrent protection match the circuit and your vessel’s electrical practices.

When planning a multi-device panel, keep module count in mind: this switch uses two modules, so it pairs cleanly with other 2-module Arké components in shared cover plates.

Compatibility and fit

A good match for boats already built out with Vimar Arké, or for new interior panels where you want the same frames, devices, and cover plates throughout. If you need switching in an exposed exterior location, use an appropriate sealed switch or relocate the device to a protected panel.

Use on board

Common uses include interior lighting circuits, ventilation controls, and other on/off loads where you want a tidy, flush panel. The illumination capability is handy on night passages when you want to find the switch quickly without turning on overhead lights.