Perko Stealth Series Fixed Mount White All-Round LED Light, 12V, 2nm

Overview

The Perko Stealth Series is a fixed mount white all-round LED navigation light for power-driven vessels under 20 meters in length. It runs on 12V DC, draws 0.1 amps, uses 1.5 watts, and carries a 2 nautical mile USCG rating, giving boat owners clear fit information for small powerboats, center consoles, runabouts, and cruising boats that need an all-round white light.

The light uses Perko's reduced-glare Stealth layout with a black polymer top, clear fluted lens, and frosted globe. A fixed black polymer base and 3/4-inch diameter anodized pole keep the installation low-profile, while the 1-inch x 2-5/8-inch base footprint helps when replacing an older light or planning a new mounting location.

Key features

• White all-round LED navigation light with a 2 nautical mile USCG rating for power-driven vessels under 20 meters.
• 12V LED operation with 1.5 watt draw and 0.1 amp current demand, useful for boats where battery load matters.
• Reduced-glare construction with a black polymer top, clear fluted lens, and frosted globe.
• Fixed mount black polymer base with a 1-inch x 2-5/8-inch footprint for deck, transom, or structure mounting where the light has proper visibility.
• 3/4-inch diameter anodized pole and #8 screw mounting size support a straightforward permanent installation.

Variants

This Stealth Series fixed mount all-round light is offered in two height configurations. Both variants share the same 12V LED platform, fixed mount base style, white all-round light output, and reduced-glare lens arrangement.

The height difference helps match the light to the mounting surface and surrounding hardware. A taller version can help lift the light above nearby rails, outboards, or canvas edges, while the shorter version keeps the profile lower where visibility remains clear.

• 1608DP1BLK: Height 4-1/2-inch. This version suits mounting spots where a lower vertical reach works with the boat's layout and the all-round light still has an unobstructed view.
• 1608DP0BLK: Height 7-1/8-inch. This version adds more vertical reach for installations where the light needs extra clearance above nearby gear or structure.

Installation and fit

Install this light on a 12V DC circuit and place it where the all-round white light can be seen without being blocked by rails, tops, engines, passengers, or fishing equipment. The fixed base is meant for a permanent mounting location, so the best position is one that keeps the light protected from foot traffic while still meeting navigation light visibility requirements.

The small base footprint is helpful on narrow transoms, aft deck surfaces, and compact mounting pads. Check the available wire path before drilling, and use appropriate marine sealant around fasteners and wire penetrations to help keep water out of the mounting surface.

Use on board

This light is a practical match for small powerboats that need a fixed all-round white LED light rather than a removable pole light. It is especially useful on boats where the owner wants low current draw, a clean black housing, and a permanent light position that is ready for evening returns, early starts, and time at anchor where an all-round white light is required.