Raymarine Axiom 7 Suncover, Surface Mount, 7 in

Overview

The Raymarine R70527 is a 7 inch surface mount suncover for Raymarine Axiom 7 multifunction displays. It fits the display when the Axiom 7 is installed in a surface mount or rear mounted configuration, giving the screen a simple protective cover when the helm is not in use.

This cover is a practical replacement or spare for boats where the chartplotter lives in an exposed cockpit, flybridge, center console, or pilothouse dash. It helps shield the display face from sun exposure, salt mist, fog, windblown spray, and dockside grit between runs.

Key features

• Made for Raymarine Axiom 7 displays using a surface mount or rear mounted installation.
• 7 inch cover format matches the Axiom 7 display size, so it keeps the helm setup neat without adding bulk.
• Helps protect the display face from UV exposure, salt, fog, spray, and windborne debris when the electronics are powered down.
• Useful as a direct replacement for a lost or worn suncover, or as a spare for boats that keep the display covered between trips.
• Light package weight of about 0.1 lb, with compact 1 in H x 6 in W x 9 in L boxed dimensions for easy storage on board.

Compatibility and fit

This suncover is specific to the Axiom 7 size and the surface mounted installation style. It is not the same cover used for trunnion mounted installations, and it should be matched to the way the display is installed at the helm.

For a clean fit, check that the display is an Axiom 7 and that the unit is installed in a surface or rear mount configuration before ordering. It is a small accessory, but using the right mount-specific cover avoids loose fitment and keeps the display face properly covered.

Use on board

This cover suits boats that leave the MFD exposed in a cockpit, console, flybridge, or other helm area where sunlight and salt air are part of daily use. It is especially useful for fishing boats, cruising boats, and tenders that spend time dockside or on a lift with the electronics uncovered.