Overview

The Garmin 010-13130-00 is a protective cover that fits STRIKER and STRIKER Vivid 5-inch units to keep the screen and keypad covered when the fishfinder is not in use.

It is compatible with STRIKER 5cv, STRIKER 5dv, STRIKER Plus 5cv, and STRIKER Vivid 5cv models. Use it at the dock, at the mooring, or on the trailer to cut down on sun exposure, salt film, and scuffs from rods, tackle, or canvas rubbing the display.

This is a storage cover, not an operating accessory. Wipe the front of the unit dry before installing the cover, and remove it before powering up.

Key features

• Made for STRIKER 5cv, STRIKER 5dv, STRIKER Plus 5cv, and STRIKER Vivid 5cv 5-inch displays.
• Covers the face of the unit during storage to help keep spray, dust, and grime off the screen and keys.
• Helps reduce screen scratches and wear when the boat is trailered or gear is stored around the console.
• Installs and removes without changing your mount, wiring, or transducer setup.
• Practical add-on for boats where the fishfinder stays mounted between trips.

Compatibility and fit

This cover is shaped for the 5-inch STRIKER-family units listed above. It will not fit 4-inch, 7-inch, or 9-inch versions, and it is not a universal cover. Confirm the exact model name on the unit bezel or in the system information menu before ordering.

Installation and on-board use

Install the cover over the front of the fishfinder after you are done for the day. Once it is seated, it keeps the unit face protected while the boat is sitting at the dock, being washed down, or moving down the road on a trailer.

It is a good match for open consoles, skiffs, and fishing boats that live outside or see frequent trailering, where sun, salt, and everyday contact are hard on a display.

Care and storage

Rinse the cover with fresh water after heavy salt exposure and let it dry before putting it back on the unit. Avoid trapping moisture under the cover for long periods, especially in warm weather.