Overview

The Garmin 010-12439-03 is a tilt mount for the STRIKER Plus 9sv fishfinder, built to hold a 9-inch display at the helm while letting you set a comfortable viewing angle.

It is meant for mounting the display head unit on a flat surface such as a dash, console, or electronics panel. This is the bracket for the screen, not a transducer mount, so it helps most when your install needs a stable place for the unit and a bit of adjustability for glare and seating position.

Key features

• Made for Garmin STRIKER Plus 9sv display mounting
• Tilt adjustment to set the screen angle for seated or standing operation
• Dash or console style mounting for clean helm layouts
• Keeps the fishfinder supported against typical vibration and movement underway

Installation and setup

Plan the mounting location so the display can tilt freely without hitting a windshield frame, throttle binnacle, or grab rail. Leave room behind the unit for cable routing and a service loop, and add strain relief so the connector is not carrying the weight of the cable run.

On boats that see frequent washdowns or salt spray, mount to solid structure and use corrosion-resistant fasteners appropriate for the surface and backing. A backing plate or large washers help spread the load on thinner dash panels.

Compatibility and fit

This mount is intended for the Garmin STRIKER Plus 9sv. Confirm your fishfinder model before ordering, especially if your boat has been updated over time or the unit has been moved between vessels.

Use cases on board

This mount is a good match for fishing boats and small to mid-size helm stations where the STRIKER Plus 9sv is viewed from different positions throughout the day. It also fits installs where you want the screen secure on a fixed surface instead of hanging from an overhead box.