Overview

The Vimar Eikon 20010 is a 1P NC push button rated at 10A and 250V, with a lightable replaceable button and a compact 22.30 x 49.00 x 36.15 mm body. On board, it fits best in protected interior switch areas where you need a flush-mounted momentary control and a finish that matches Eikon trim.

It is a built-in modular device with snap fastening, a matt thermoplastic body, halogen-free construction, and IP40 protection. That makes it better suited to cabins, saloons, enclosed helm stations, and other sheltered spaces rather than exposed deck positions or washdown areas.

Key features

• 1P NC push button format with a 10A, 250V rating for circuits that require a momentary normally closed contact
• Lightable, replaceable button for a control point that can stay visible in low light and remain easy to service
• Built-in mounting with snap fastening for flush installation in compatible Eikon modular assemblies
• Thermoplastic, halogen-free body with matt finish and IP40 protection for protected interior locations
• Compact 22.30 x 49.00 x 36.15 mm dimensions with a label space for clearer switch identification on grouped panels

Variants

This product is offered in three color configurations within the same Eikon 20010 format.

Across the listed variants, the operating format remains a 1P NC lightable push button rated at 10A and 250V, with the same built-in snap mounting, IP40 protection, and 22.30 x 49.00 x 36.15 mm dimensions. The change between versions is the visible front color.

• VM20010.B: Color White. This version has a bright front that stays easy to read on light interior panels and trim.
• VM20010.N: Color Silver. This finish gives the control a metallic look that works with neutral or metal-accented interior switch areas.
• VM20010: Color Grey. This darker finish blends neatly into charcoal or technical panel layouts.

Compatibility and fit

This is a modular built-in device for compatible Vimar Eikon switching assemblies, not a standalone weatherproof switch. The contact type matters before replacement or retrofit, because this unit is normally closed and many push-button circuits on boats are wired around normally open logic instead.

The compact body helps when panel depth is limited, and the front label space is useful where several controls sit side by side and need clear identification.

Installation and setup

Flush mounting and snap fastening keep installation straightforward in a compatible frame or support. The lightable button can be used where a visible control point is helpful at night, especially around interior companionways, cabin entrances, or enclosed helm panels, provided the rest of the switch setup is configured for illumination.

Use on board

This switch makes sense for cruisers, sailboats, and motorboats that use Vimar Eikon devices in protected interior spaces. It suits owners, electricians, and refit yards looking for a momentary control with a replaceable button, a labeled front, and a finish that matches the surrounding switchgear.