Victron Energy Wall Mount, For Blue Smart IP65 Chargers 12/10, 12/15, 24/8

Overview

The Victron Energy BPC920100200 is a wall mount bracket for Victron Blue Smart IP65 battery chargers in the 12/10, 12/15, and 24/8 versions. It holds the charger on a vertical surface so the unit can stay in one place instead of being left loose on a bench, shelf, cockpit locker sole, or service area.

The bracket measures 145 mm wide, 134 mm high, and 72 mm deep, with three 6 mm mounting holes. That footprint is useful on boats and in dockside workspaces where battery charging gear needs to be easy to reach while staying clear of wet decks, loose tools, cable clutter, and movement underway.

Key features

• Fits Victron Blue Smart IP65 Charger models 12/10, 12/15, and 24/8.
• Wall-mounted holder keeps the charger in a fixed location for a cleaner battery charging setup.
• 145 x 134 x 72 mm bracket size helps confirm available mounting space before installation.
• Three 6 mm mounting holes give installers a straightforward way to fasten the holder to a bulkhead, panel, bench side, or workshop wall.
• Open holder layout leaves the charger face visible, so status lights and access remain easy during use.
• Practical for marine battery maintenance setups in lockers, service spaces, garages, and dockside charging areas.

Installation and fit

Before drilling, compare the available mounting area with the bracket dimensions and allow room above and below for the charger leads to bend naturally. Fasten the holder to a solid surface that can support the charger without flexing, especially where vibration or regular movement is expected.

On a boat, the best location is usually near the battery service area but away from places where lines, gear, or standing water can interfere with the charger. The mount helps keep the compatible Blue Smart IP65 charger ready for routine battery care without turning the charging station into loose equipment.

Compatibility and use

This accessory is for physical mounting only; it does not change charger output, battery compatibility, or charging functions. Match it to one of the listed Victron Blue Smart IP65 charger models and route AC and DC leads with enough strain relief so the cables are not pulling on the charger while it sits in the holder.

It suits owners and installers who want a tidy, repeatable charging point for maintenance charging, winter layup, workshop testing, or regular dockside battery care using an existing compatible Victron charger.