TACO Marine Shock Cord with Double Pulley, 12 in, 2pk

Overview

The TACO Marine COK-0022-2 is a 12 inch shock cord with a double roller for keeping tension on halyard and rigging lines in marine outrigger setups.

It attaches to the boat and helps keep the line under steady tension while the double roller lets the line move smoothly during use. This is useful on fishing boats where outrigger lines need to stay organized and responsive without adding a bulky rigging component.

The pair format makes it suitable for setting up both sides of a spread or replacing matching rigging accessories at the same time.

Key features

• 12 inch shock cord helps maintain tension on halyard and rigging lines.
• Double roller eye supports dual rigging and helps the line move with less friction.
• Shrink-wrapped ends help protect the cord ends from fraying during regular use.
• Corrosion-resistant hook clasps suit exposed deck and cockpit rigging locations.
• Sold as a pair for matched port and starboard rigging setups.
• Covered by a 1-year limited warranty.

Installation and use

This shock cord is made for straightforward attachment to boat rigging points where tension is needed on an outrigger, halyard, or similar control line. The hook clasps allow quick connection, while the roller section helps guide the line as it moves under changing load.

For best results, mount each assembly where the shock cord can stretch in line with the rigging path without rubbing against sharp edges, hardware corners, or abrasive surfaces.

Compatibility and fit

This product fits marine rigging applications that use a short shock cord assembly with a double roller to manage line tension. It is commonly used around outrigger systems and fishing spreads where smooth line travel and consistent tension matter more than electrical specifications.

Before ordering, compare the 12 inch shock cord length and attachment style with the existing rigging layout on the boat.

Maintenance and care

Rinse the assembly with fresh water after saltwater use, especially around the roller and hook clasp areas. Check the shock cord, shrink-wrapped ends, and clasp engagement during routine rigging checks, and replace the assembly if the cord loses elasticity or shows wear that could affect line control.

What’s included

• Two 12 inch shock cord assemblies with double rollers