Overview

The Garmin 010-12841-01 is a protective cover for ECHOMAP Ultra 10-inch chartplotters, including the ECHOMAP Ultra 102sv and 106sv.

It keeps the display face covered when the boat is sitting at the dock, on a lift, or on the trailer, where sun, salt spray, dust, and day-to-day cockpit scuffs can take a toll on a touchscreen.

If you leave your electronics installed between trips, a fitted cover like this helps keep the screen cleaner and reduces the chance of scratches from gear, rod handles, or washdown overspray while the unit is powered off.

Key features

• Made to fit ECHOMAP Ultra 10-inch units, including ECHOMAP Ultra 102sv and 106sv
• Covers the screen and front bezel to help guard against sun exposure, salt spray, and dockside grime when not in use
• Helps reduce screen scratches from stored gear, covers, and everyday contact around the helm
• Useful for boats that are trailered or stored outdoors where the display is exposed between trips

Compatibility and fit

This cover is sized specifically for the 10-inch ECHOMAP Ultra display family. If your unit is a different ECHOMAP size, it will need a cover made for that screen size.

Confirm the model name on your bezel or in the unit information screen before ordering, especially on boats with multiple Garmin displays.

Installation and day-to-day use

Put the cover on after shutdown when you are done running for the day, and remove it before powering the chartplotter back on. For best results, wipe away grit first so sand and salt crystals do not get rubbed across the screen.

Rinse the cover with fresh water after heavy spray days and let it dry before long-term storage.

Use cases on board

This is a good match for open helms, center consoles, and cockpits where the display stays mounted and sees sun and spray between outings. It also helps on fishing boats where rods, tackle, and coolers get moved around near the electronics.