TACO Marine Double Mono Outrigger Rigging Kit, For 20 ft Carbon Fiber Poles, 400 lb Mono

Overview

The TACO Marine RK-0002MP is a premium double mono outrigger rigging kit for setting up 20 ft long carbon fiber outrigger poles. It pairs a 1/8 in thick, 180 ft coil of black Lindgren Pitman 400# monofilament with the hardware needed to run a double rig, so each outrigger pole can carry two bait positions for a wider trolling spread.

This kit is built around practical rigging parts rather than loose replacement pieces. The double roller pulley shock cord uses stainless-steel snap hooks, and the kit also includes adjustable tension release clips, outrigger line stops, crimps, swivels, and mounting hardware for completing a clean halyard setup.

For offshore and coastal trolling crews, it keeps the rigging parts together in a quick-dry mesh bag, which helps when working at the dock, changing a spread before a run, or storing the components between trips.

Key features

• Single kit for double mono outrigger rigging on 20 ft long carbon fiber outrigger poles.
• 180 ft coil of black Lindgren Pitman 400# monofilament, 1/8 in thick, for the halyard line.
• Double roller pulley shock cord with stainless-steel snap hooks for halyard movement and attachment points.
• Adjustable tension release clips for setting bait release tension to match the trolling setup.
• 1-3/4 in outrigger line stops, double sleeve crimps, Coastlock-style swivels, and snap swivels support a complete rigging layout.
• Quick-dry mesh bag keeps the components organized in the cockpit, tackle station, or storage locker.
• 1-year limited warranty.

What’s included

• Double roller pulley shock cord with stainless-steel snap hooks.
• 1/8 in thick, 180 ft coil of Lindgren Pitman 400# monofilament in black.
• Adjustable tension release clips.
• 1-3/4 in outrigger line stops.
• Stainless-steel eye strap and screws.
• Double sleeve crimps.
• Coastlock-style swivels and snap swivels.
• Quick-dry mesh bag.

Installation and setup

This kit suits boats being rigged with carbon fiber outriggers where a mono halyard is preferred. The component mix is intended for a double-outrigger setup, so confirm pole length, existing outrigger hardware, and the halyard route before cutting or crimping the mono.

During installation, lay out the mono, pulleys, clips, stops, swivels, and crimps before making final connections. That makes it easier to keep the release clips placed where the crew can reach them and to keep the halyard running freely when the poles are deployed.

Use and care on board

This rigging kit is a good match for trolling crews that want a complete mono setup for two baits per outrigger pole without sourcing each small component separately. It is especially practical for center consoles and sportfishing boats that need an organized rigging kit kept close to the tackle station.

After fishing, rinse the rigging parts with fresh water and let the mesh bag drain before storage. Check crimps, swivels, snap hooks, and mono for chafe or corrosion as part of the normal outrigger inspection, especially after saltwater trips or heavy trolling loads.