Electrical Monitors

OverviewThe Blue Sea Systems 1820 is a submersible temperature sensor for Blue Sea devices that accept a temperature input. It is rated IP68, uses a 10,000 Ohm sensor at 25°C, and covers a working range from -40°F to 175°F (-40°C to 80°C).This is the...

OverviewThe Blue Sea Systems 1811 is a gasoline tank sender for the Vessel Systems Monitor VSM 422. It uses non-contact ultrasonic sensing, can be calibrated for the individual tank through the monitor, and is intended for tank depths up to 24 inches...

OverviewThe Blue Sea Systems 1810 is an ultrasonic tank sender for diesel, water, and waste tanks used with the Vessel Systems Monitor VSM 422. It reads tank level without internal moving parts in the sensing path, and it can be calibrated to each tank...

OverviewThe Blue Sea Systems 1525 is a 1 x 1 360 Panel System module that mounts an M2 Monitor and matches existing 360 panels. Its listed size is 4.75 in high by 4.88 in wide, which gives you a clear reference when planning panel space or replacing...

OverviewThe Blue Sea Systems 1519 is a 1 x 1 panel module for mounting a VSM 422 in a Blue Sea Systems 360 Panel system. The face measures 4.75 x 4.88 inches, and it matches the look of other 360 panels so the finished helm or electrical panel stays...

OverviewThe Blue Sea Systems 1475 is a mounting panel for a single standard 2-3/4 inch analog or digital meter. It gives you a clean way to add one meter to a helm, electrical panel, or monitoring station without cutting a custom faceplate, and the panel...

OverviewThe Blue Sea Systems 1070 is a Floyd Bell Turbo Series panel-mount audible alarm for 12V and 24V DC warning circuits. It runs on 5 to 30V DC, fits a 1 inch round panel aperture, and uses a pulsed alarm tone that reaches 103 dB at 30V DC.This is...