Marine Engine Cooling

OverviewThe Jabsco 836-0001-P is a 9-blade neoprene impeller kit for flexible impeller pumps that use a 3-3/4 inch outside diameter, 2-1/2 inch depth, and a 1 inch spline-drive hub. It uses a brass insert at the hub and suits common marine pump duties...

Inboard HD Flush BuddyEasy to use inboard motor flusher. Great for winterizing, maintenance or anytime you need to run your inboard engine while out of the water. Just connect the garden hose, fit the cup over the water intake and extend the leg sealing...

OverviewThe Jabsco 6303-0007-P is a urethane impeller kit for certain Jabsco flexible impeller ballast and water transfer pumps that use a 6-blade, single flat drive impeller with a 2 inch diameter, 7/8 inch width, and 5/16 inch shaft size.This version...

OverviewThe Jabsco 5929-0003-P is a 12-blade nitrile replacement impeller for bronze flexible impeller pumps used in engine cooling, bilge, transfer, and other general-purpose pumping jobs on board. It uses a Ding Drive keyway hub with a brass insert,...

OverviewThe Jabsco 22405-0001-P is a packaged neoprene impeller kit for flexible impeller pumps that use a slotted shaft pin drive and a 6-blade profile. The impeller measures 1-9/16" in outside diameter, 3/4" in depth, and 15/32" at the shaft fit, with...

OverviewThe Jabsco 6056-0003-P is a nitrile replacement impeller kit for compatible Jabsco flexible impeller pumps that use an 8-blade rotor with a 2-9/16 in diameter, 2 in width, 5/8 in shaft size, and brass keyway insert. Its dimensions match the...

OverviewThe Jabsco 18948-0001-P is a replacement impeller kit for flexible impeller pumps used for engine cooling water, bilge, transfer, and other general-purpose marine pump duties. It uses a 12-blade neoprene impeller with a key-drive hub, a 2-9/16 in...

OverviewThe Jabsco 18838-0001-P is a 12-blade neoprene replacement impeller kit for keyed-drive bronze flexible impeller pumps. It measures 2-7/16 in in diameter, 1-1/4 in in depth, uses a 5/8 in shaft diameter, and has a brass insert at the hub, so it...

OverviewThe Jabsco 18777-0001-P is a neoprene impeller kit for marine flexible impeller pumps that use a 10-blade rotor with a 2-1/4 in. diameter, 2 in. width, 5/8 in. shaft size, spline drive, and brass insert. Those dimensions are the key fit points on...