Overview

The Vimar EIKON Series 1 Module Four Interchangeable Half Buttons is a 1-module set of four interchangeable half-buttons for compatible switch or push-button control points. It uses halogen-free thermoplastic with a matt finish, clamp mounting, a monitoring window or light outlet, and IP40 protection. Nominal dimensions are 22.3 x 22.1 x 5.7 mm.

This is a trim and control-element part rather than a powered electrical device, so the main buying checks are the matching EIKON family, the 1-module format, and the symbol printed on the front. On board, it makes the most sense for protected interior panels such as an enclosed helm, cabin switch bank, or service area where the installation is kept away from washdowns and direct weather.

Key features

• 1-module format with four interchangeable half-buttons for compatible Vimar EIKON switch or push-button positions.
• Available with I, O, I/O, or regulation symbols to keep switch functions clearly marked.
• Grey and white versions use an untreated matt surface, while silver versions use a lacquered matt finish.
• Halogen-free thermoplastic construction with a monitoring window or light outlet.
• IP40-rated front piece with clamp mounting for sheltered interior panel locations.

Variants

This range changes in two ways: the printed symbol and the finish color. Symbol options are I, O, I/O, and regulation symbol. Finish options are grey, white, and silver, so the same control point can be matched to the panel style and the function it operates.

Across the range, the format stays the same at 1 module with four interchangeable half-buttons, clamp mounting, thermoplastic construction, a matt surface, a monitoring window or light outlet, and IP40 protection.

Compatibility and fit

Fit depends on the matching Vimar EIKON support and the underlying 1-module switch or push-button mechanism already installed in the panel. These half-buttons are control and cover parts, so they are used to restore the correct look and symbol layout on an existing control point rather than to change the electrical function behind it.

This is a sensible replacement for boats that already use Vimar interior switching components and need worn, mismatched, or incorrectly marked button faces brought back into line. For exposed exterior locations, the IP40 rating points to use in protected areas instead of open deck positions.

Installation and setup

Clamp mounting keeps installation straightforward when replacing like-for-like parts within an EIKON panel. The monitoring window or light outlet is useful where the underlying mechanism uses a locator or indicator light, which helps keep switch status visible in low-light cabin or helm conditions.