Overview

The Vimar VM10737 is a 3-module self-bearing cover plate in resin for 3-module flush mounting boxes, finished in ivory. It measures 120 mm wide by 76 mm high and is meant for interior areas where the plate is not exposed to spray or washdowns, with an IP00 protection rating.

This plate is part of the LINEA Classica look and is used to finish a modular switch or outlet position cleanly once the mounting frame and devices are in place. The thermoplastic material is halogen-free, and the matt, untreated surface helps it blend into helm panels, cabin bulkheads, and other onboard interiors without looking glossy.

Key features

• 3-module format for Vimar modular device layouts on 3-module flush mounting boxes
• Horizontal or vertical orientation, depending on how the box is installed
• Clamp mounting fastening method for a secure fit against the mounting surface
• Thermoplastic construction that is halogen-free
• Matt, untreated finish in ivory, with a similar RAL reference of 9003
• IP00 rating for protected, dry interior locations
• Includes an information surface for labeling, helpful for circuit or function identification

Compatibility and fit

This is a 3-module plate sized for 3-module flush mounting boxes, with a face size of 120 mm by 76 mm. It is intended for installations where the devices and their mounting support align to the 3-module format, keeping switch and outlet spacing consistent across a panel or bulkhead.

Installation and setup

Install it after the box, mounting support, and modules are secured and aligned. The plate supports both horizontal and vertical mounting directions, so the final orientation is set by the way the box and devices are positioned. Once fastened, the screw covers give the front a clean finish with no exposed hardware.

Materials and environment

The resin plate is a thermoplastic part with a halogen-free material specification. With an IP00 rating, it should be kept out of wet zones such as open cockpits, exposed consoles, and areas that see direct washdowns. In a protected interior, it holds up well to everyday handling and the vibration you get underway.

What’s included

• 3-module self-bearing cover plate
• Fixing screws
• Screw covering strips (10798.01)

Use on board

This plate is a good match for refits and new builds that use Vimar modular switching and want a consistent 3-module layout across cabins, nav stations, or protected helm panels. It is also useful when replacing a cracked or yellowed plate and keeping the existing box and device arrangement intact.