Overview

The Vimar LINEA blank 1-module is a flush-fit insert used to close an unused 1-module opening in a LINEA wiring layout. It is made from halogen-free thermoplastic with a matt surface, carries an IP40 protection rating, and measures 22.20 x 52.80 x 15.80 mm.

This is a small finishing part, but it matters when you want a switch panel or control point to look complete and stay easier to clean. On board, it makes sense anywhere a LINEA frame has a spare position in a protected interior area such as the cabin, chart table, service panel, or helm console that is kept away from direct washdown.

The insert has no contacts, no lighting, and no marking window. It simply blanks the opening while keeping the face of the installation neat and consistent with the rest of the LINEA range.

Key features

• 1-module blank insert for unused positions in Vimar LINEA modular installations
• Halogen-free thermoplastic body with a matt finish
• IP40 protection rating for sheltered interior mounting locations
• Compact size of 22.20 x 52.80 x 15.80 mm for standard 1-module fit within the LINEA system
• No contacts, no lighting, and no label window, so it works purely as a clean closure piece
• Built-in mounting format for flush installations using the LINEA modular arrangement

Variants

This product is offered in multiple color configurations within the same 1-module LINEA blank insert format.

The variation across the range is the visible finish color. The 1-module size, matt surface, thermoplastic construction, IP40 rating, and general fit within the LINEA modular system remain the same across the listed versions.

• VM30041.G: Color Black, RAL 7021. This finish blends into darker switch layouts and helps the blank insert stay visually discreet on black or mixed-color panels.
• VM30041.C: Color Canvas, RAL 7032. This lighter neutral tone works well where the surrounding trim uses softer beige or off-white shades.
• VM30041.B: Color White, RAL 9016. This option keeps the appearance clean and straightforward on white switch assemblies and light interior panels.

Compatibility and fit

This insert is intended for Vimar LINEA modular installations and is sized as a single module. It is a good match when a frame or support has an unused opening that needs to be closed without changing the look of the rest of the switch assembly.

For marine refits, it suits installations where equipment layouts evolve over time and one position is left unused for now. It is most appropriate in dry interior spaces rather than exposed exterior locations, since the listed protection level is IP40.

Installation and use

Because this is a built-in modular part, fit should be checked against the existing Vimar LINEA support and cover arrangement already on the boat. Once installed, it leaves the panel face finished and avoids the open slot look that can collect dust and stand out visually.

This part makes sense for builders, refit yards, and owners who want a tidy LINEA switch panel while keeping the option to reconfigure that module position later.